Отправка в тот же день для всех заказов, размещенных до 14:00 по всей Европе с использованием DPD
Нет товаров
Цены указаны с учетом НДС
Товар добавлен в корзину
Товаров в корзине: 0. Сейчас в корзине 1 товар.
Популярные товары
"Incontournable N" box
RAV036-01_02This box contains:- 1 cutter head 50 mm high Ø100 mm- 1 brazed grooving cutter 5/10 Ø120 mm- 1 rebate cutter with knives 20/39.5 Ø150 mm- 1 bearing Ø55 mm- 1 ring Ø 100 mm to be mounted on the bearing Ø55 mm- 3 knives 203/205/220 - 50 mm high - 1 spindle moulder rule
From 553,02 €- -5%
Sharpening systems
TORM04-09Extended universal jig for sharpening long tools such as long knives, choppers and machetes. Micrometric adjustment with scale for precise setting of the edge angle.
From 115,05 € 121,10 € -5% - -5%
Multi Jig SVS-50
TORM03-08For turning skew chisels, parting and beading tools and roughing gouges.Straight carving gouges up to 50 mm (2”) wide.
From 66,65 € 70,16 € -5% - -5%
Tool Rest SVD-110
TORM03-13For turning scrapers, hollowing tools and thin parting tools.Also for cabinet scrapers, screwdrivers and spoke shave blades.
From 37,89 € 39,88 € -5% - -5%
HTK808 woodturner's kit
TORM02-KIT_TNT808This kit contains everything you need to shape and sharpen all your turning tools, including two patented jigs, a radiused leather honing wheel, thorough instructions, the appreciated Turning Tool Setter and the Tormek Case to store all your jigs.The jigs are packed in the Tormek® Case TC-800 with the TNT-00 storage tray. The Tormek case simplifies the...
From 374,22 € 393,92 € -5% -
Adjustable slotting cutter head with reversible knives
PE005-01- Two-piece, adjustable by spacing rings - Steel cutter head- MAN / Manual feed
From 744,91 € -
CMT Carpenter Pencil
CMTPCL-1An easy-grip shape and larger rectangular surface area means this pencil won’t roll away or slip from your hands.The non-round core makes highly legible thick or thin lines.Perfect for tracing high precision markings on virtually any surface and easy to erase.Strong lead centre withstands the stress of rough handling as well as the rigours and extreme...
From 2,55 € -
-
STAINLESS STEEL engraved 35 cm carpenter’s ruler
MESU018-05Very sturdy, made of stainless steel, 1.4 mm thick, the carpenter's ruler is graduated in cm from 0 to 35 then in mm from 0 to 150, engraved by deep acid etching on both sides.350 mm long to measure in cm from 0 to 350 then in mm from 0 to 150.The ruler has a matt anti-reflective coating and a hole centred at the end.
From 9,72 € -
Universal cutter head series Multi disc
ZAKP.O-DISQUESThe diameter indicated corresponds to the maximum cutting diameter on a disc fitted with 2 x 560 series knives except for the panel raiser knives where the diameter is to be increased by 10 mm.
From 84,48 € -
-
Finger pull router bits
CMT855-955Why interrupt the subtle linearity of an all-wood drawer front or cabinet door with a metal knob or handle? Use a CMT finger pull bit and make a harmonious wooden handle. Choose your preference - a template profile made directly in the wood or a European-style hardwood pull.
From 93,14 € -
Positive carbide tipped trapezoidal toothing low noise
CIRC005-03Carbide tipped circular recoil saw blade for cutting and panel formatting - Heller toothing - Silent.
From 77,44 € -
Positive carbide tipped trapezoidal toothing
CIRC005-01Carbide tipped circular recoil saw blade for cutting and panel formatting - Heller toothing.
From 91,11 € -
Flat teeth with chip limiters
CIRC002-01Carbide tipped circular recoil saw blade for cutting.
From 36,66 € -
-
Three square files
LIME002Three square files 5 shapes : three-square saw files regular, slim, extra slim, and round edges.
From 9,62 € -
DS steel jointer planer knives - 3.0mm
FERS001-02DS steel jointer planer knive for woodworking on planing cutter head. Thickness : 3.0mm.
From 41,46 € - -5%
Composite Honing Wheel CW-220
TORM04-11The easy to use composite honing disc has a built-in polishing agent that removes the hard edge.Suitable for use in clean environments. No need to add hone compound.Compatible with Tormek® T-8, Tormek® T-7 and Tormek® 2000.Tip when honing! Moisten the composite honing disc with a little water for smoother honing. Use a sponge or cloth.
From 96,69 € 101,78 € -5% - -5%
EM-15 edge market
TORM08-07The edge marker with a chisel tip is designed to easily colour the bevel when you want to find and replicate the tools existing edge angle.
From 6,56 € 6,91 € -5% - -5%
BGM-100 bench grinder mounting set
TORM04-08The kit allows you to remove a large amount of steel to create a desired profile on a new tool, it also allows you to use the Tormek® woodturning jigs on your grinder.
From 83,34 € 87,72 € -5% - -5%
Stone Grader SP-650
TORM04-06The fine side grades the stone for a 1000 grit finish. The coarse side of the grader reverses the stone to normal fast grinding.
From 30,30 € 31,89 € -5% -
Interchangeable torque wrench
CMTTW200The interchangeable torque wrench is supplied inside a very handy case complete with a user manual.A calibration certificate guarantees your tool has duly been inspected according to DIN ISO 6789 & ASME B107.300-2010.The interchangeable torque wrench is highly versatile but recommended for tightening CMT chucks.
From 263,90 € -
Universal cutter head with counter knives (40 mm high)
RAV027-01Light alloy universal cutter head with multiple profile counter knives40 mm high
From 156,44 € -
-
Digital height gauge
CMTDHG-001- Horizontal and vertical measuring.- Self-standing for setting cutting depth on router tables and low profiles for backfence adjustment.- Measuring ruler with metric/imperial scale and locking screw.- Instruction manual.
From 55,56 € -
-
Riffler rasps
STUB030-01This tool is part of the rasp family, used to shape parts with complex shapes, to access corners and hard to reach surfaces.Used for meticulous modelling work.
From 21,67 € -
-
-
-
-
Decorative ogee router bits
CMT7-8-965-2Make subtle decorative edges with this bit! Perfect for enhancing doors and drawer fronts, it will deliver smooth and flawless results. Carbide-tipped to ensure a clean, sharp and precise cut.
From 38,18 € -
-
-
-
Positive trapezoidal tooth for nonferrous metals ELITE
CIRC011-01High quality circular saw blade for formatting requiring perfect cutting quality. Body rectified and balanced individually, anti-noise and anti-vibration slot.
From 316,24 € -
Extensible carbide tipped scoring blades
CIRC005-10Extensible scoring blade to cut the plated side of the panel and prevent splinters when formatting.
From 121,65 € -
Carbide tipped conical scoring blades
CIRC005-09Conical scoring blade to cut the plated side of the panel and prevent splinters when formatting.
From 74,51 € -
3 in 1 flush trim bits for MDF/laminates
CMT7-8-907Perfect trimming with the conical edges!Thanks to the innovative conical edges of this bit you will always get perfect cuts even after re-sharpening. In fact, the most popular problem you have with the standard flush trim bits is the undersize diameter after re-sharpening which leaves the mark on the material; now with the new CMT construction you could...
From 35,94 € -
Jig saw blades JT718BF
JT718BFStraight fine cut on sandwich panels with less than 120mm (5”) in thickness.
From 15,84 € -
-
Scie japonaise Pro multifonction et d'élagage
TAKAGI-08.1Élagage, usage multiple, coupes nettes.
From 36,92 € -
Storage bag for turning tools
STUB032-02Make up your own kit!This roll bag is the ideal carrier for your turning tools.(supplied empty)
From 23,56 € -
"Incontournable - 250" box
RAV036-01_03This box contains:- 1 cutter head 50 mm high Ø100 mm- 1 brazed grooving cutter 5/10 Ø120 mm- 1 rebate cutter with knives 20/39.5 Ø 150 mm- 1 circular blade HM Ø250 mm - Al: 30 - Z: 48- 1 bearing Ø55 mm- 1 ring Ø 100 mm to be mounted on bearing Ø55 mm- 3 knives 203/205/220 - 50 mm high - 1 spindle moulder rule
From 597,50 € - -5%
Tormek® Case TC-800
TORM08-03The Tormek Case keeps your jigs and accessories organised. It is easy to carry thanks to the premium leather handle.
From 63,02 € 66,34 € -5% - -5%
XB-100 horizontal base
TORM05-09Upgrade kit for older Tormek® machines. Thanks to the horizontal base, you can move the universal support from vertical mount (for grinding towards the edge) to horizontal mount for grinding away from edge.).
From 30,30 € 31,89 € -5% - -5%
Honing wheel
TORM05-06The wheels is used together with the PA-70 honing compound to gently to remove the burr which develops during grinding and polishes the bevel.
From 56,15 € 59,10 € -5% - -5%
Rubber wheel
TORM05-04Drive wheels for the Tormek® water cooled sharpening machine.
From 69,10 € 72,74 € -5% - -5%
MSK-200 stainless steel shaft
TORM05-02With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left hand thread causes the rotation of the wheel to tighten the nut to the right torque. Ø; stone: 250 mm
From 50,00 € 52,63 € -5% - -5%
MB-100 multi base
TORMMB102The MB-102 base has an adjustment line that allows you to fix the sharpening position based on the optimal setting for each tool and jig. The MB-100 For convenience, it can be mounted vertically or horizontally.
From 108,95 € 114,68 € -5% - -5%
OWC-1 converter
TORM04-05Trues the grindstone exactly round and flat. Guided by the universal support. Dual knobs for smooth feed across the stone.
From 16,67 € 17,55 € -5% -
Lock miter router bits
CMT8-955.503.504CMT lock miter bits are ideal for milling miter joints from 9,5mm (3/8”) to 28,5mm (1-1/8”) stock. The quick and easy way to accurately create boxes, stretcher bars, frames and any assortment of right angle or parallel joint projects.
From 135,35 € -
-
-
-
Push stick
CMT999.110.41-01Maintaining control of small stock during drilling operations can be quite challenging, as hand safety is imperative.We recommend our push stick, which guarantee safe precision drilling.
From 13,71 € -
-
Surfacing cutter for composites
CMT8-922.036-sided cutter to cut into pieces.Removes material evenly to shape and customise solid composite surfaces.Curved cutting edges to create very smooth edges and facility cleaning. For hand-held portable routers.
From 101,64 € -
Adjustable brazed carbide 5/10 grooving cutters
ZAKP.O-FRAISE-4These cutters adjustable from 5 to 10 mm are designed to produce grooves from 5 to 10 mm. Their carbide cutting components enable them to be used in all types of wood and chipboard. The geometry and spurs guarantee high-quality work without splinters.
From 93,64 €