Отправка в тот же день для всех заказов, размещенных до 14:00 по всей Европе с использованием DPD.
Нет товаров
Цены указаны с учетом НДС
Товар добавлен в корзину
Товаров в корзине: 0. Сейчас в корзине 1 товар.
Биты для пазов
Откройте для себя наши 12 ссылок в этой категории : Биты для пазов
Countersink screw slot router bits
CMT8-913Any large panel or table top should be secured in a way that allows it to expand or contract without splitting. These screw-slot bits let you create screw slots so that panels can be held in place but are able to slide back and forth without splitting the wood or breaking the screw securing them.
From 57,67 €-
Flooring router bits
CMT822.023B-822.024BThis new industrial quality carbide-tipped CMT router bits is great for flooring and inlay applications. You can easily and smoothly run through solid and timber wood while cutting edges keep sharp still after several passes. This tool is equipped with a stop collar and a bearing.
From 54,55 € -
Three wing slot cutter sets
CMT8-900.506Create slots, grooves and rabbets in materials from 3,2mm (1/8”) to 18mm (23/32”) in depth by using the adjustable CMT three wing slot cutter set. See chart below for details on spacing and correct cutter combinations. Ideal for biscuit joints and milling perfect tongue and groove joints. Sets include:- 4 carbide tipped cutters 3,2mm (1/8”), 4mm (5/32”),...
From 129,05 € -
Tongue & groove set
CMT8-900.626Make tongue and groove joints without the complicated process of taking apart and reassembling bits. The new CMT tongue and groove set gives you one bit to groove the slot and a separate bit to mill the tongue. Or use your imagination and put them to work individually on other projects. Makes tongue and groove cuts in wood up to 19mm (3/4”) thick.
From 127,11 € -
Slot cutters
CMT7-8-922A-BUses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, T-molding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of many arbors which include...
From 45,57 € -
-
Slot cutters
CMT822Slot cutters for sidelong grooves. They feature 8mm (5/16”) bore diameters, 47,6mm (1-7/8”) cutting diameters and cutting length from 1,6mm (1/16”) to 6,4mm (1/4”).
From 25,17 € -
Slot cutters
CMT923A-823BThe possible uses of this bit are almost: you can rout grooves and rabbets, T or dovetail joints on wood panels. Each bit has three carbide tipped cutters and has an orange colored PTFE coating, it features anti-kickback design too. The 22mm (7/8”) bearing is included for a cutting depth of 12,8mm (1/2”). The bit and the slot cutter are available also...
From 53,91 € -
Slot cutters with 45° bore
CMT823These three wing carbide tipped slot cutters feature anti-kickback three wing blade design and CMT's trademark orange PTFE Industrial Coating. All cutters feature an 8mm (5/16”) bore that fits CMT's arbors (items 7/8/924).
From 30,30 € -
-
2 piece glass panel bit sets
CMT8-955.803MFThese 2-piece bit sets allow you to produce glass panel doors using a rubber panel retainer to secure the glass in a 3,2mm (1/8”) slot cut into the frames.
From 123,38 € -
Slot cutters
CMT8-922.016BUses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, T-molding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and the trademarked orange non-stick PTFE coating.
From 59,20 €
- Биты для прямых пропилов
- Фиксированные триммеры и профилировщики
- Биты с фальцем
- Биты для пазов
- Биты для столярных работ
- Биты «ласточкин хвост»
- Надпись, V-образные фрезы для обработки канавок и фасок.
- Биты глубокого профиля
- Филейные/четвертькруглые биты
- Профилированные биты
- Многопрофильные биты
- Биты для панелей
- Биты для композитных материалов
- Биты для замков
- Коробка бит
- Биты с прямой нарезкой серии FOZ
Filter by:
Last Posts
-
The Importance of a Well-Sharpened Knife in the Kitchen
Discover how to sharpen your kitchen knives optimally with a sharpening machine.
-
Японские пилы Takagi Shark Saw: Союз традиций и технологий для идеальных резов
Японские пилы Takagi, особенно серия Shark Saw, известны своей эффективностью и точностью.
-
Knife sharpening angle adjuster KS-123 Tormek
Set the perfect sharpening...
-
-
