Отправка в тот же день для всех заказов, размещенных до 14:00 по всей Европе с использованием DPD
Уважаемые покупатели, с 5 по 16 августа 2024 года включительно.
Нет товаров
Цены указаны с учетом НДС
Товар добавлен в корзину
Товаров в корзине: 0. Сейчас в корзине 1 товар.
Bits with carbide knives
31 товаров.
CMT663.5New milling cutter for CNC pantographs, ideal for planing and for quickly removing material from large surfaces, guaranteeing a good finish.For use on soft and hard wood, chipboard and MDF.Economically attractive solution thanks to the reversible knives.
From 228,06 €-
-
-
-
- FRAI105
For making expandable grooves on CN.
From 725,04 € - ME110WS-01
- Grooving cutting head for solid wood and panels of all kinds (coated or non-coated)- Steel body with reversible carbide knives on 4 cutting edges- Two-piece, adjusted by spacers- Recommended for routers and CNC machines - MEC / mechanical feed
From 503,45 € - PS122WS-01
- Bit with reversible 4-sided carbide knives for fast rebating, flush trimming and surfacing large surface areas- Suitable for soft and hardwood and all kinds of panels- Recommended for routers and CNC machines- MEC / mechanical feed
From 374,72 € - CMT663
New router bit for CNC router ideal for fast removal of material over a large surface area leaving an improved finish at the bottom of the cut. Used on soft and hardwood, particle board and MDF. The cutter uses 4-sided inserts. Cost effective solution compared to brazed router bits and solid carbide spiral bits.
From 231,55 € -
- EU8020-01
- For glue joints of edging- Cutters with PRECIS-CUT carbide knives- Cutter head mounted on CNC arbor
From 1 272,71 € - PA020WS-01
To produce glue joints in soft and hardwood. Non-reversible carbide knives with positioning stop for quick and precise positioning + an eccentric ring for lateral adjustment of the knives for the glue joint, depending on the species of wood processed.
From 753,60 € -
- PC505WS-01
- Roughing cutter head with HW knives to size soft and hardwood as well as coated or non-coated panels- Reversible knives with 4 cutting edges, spread over 4 spirals for optimum chip removal and flow- Suitable for routers and CNC machines- MEC / mechanical feed
From 305,89 € - PC808WS-01
- Cutter head to straighten, size and rebate solid wood and various panels- Particularly suitable for curved woodwork or chair legs- 2+2 alternating mitre cuts with 4-sided reversible carbide knives, helically mounted on 4 divisions + 2 spurs in the lower part- Optimised helix angle and clean cut for high feed rates- To be mounted on cutter arbor Ø30 x...
From 527,40 € - PA030WS-01
- To produce chamfers, decorative grooves and mitre fold grooves in all kinds of wood and panels- Cutter head with reversible carbide knives with side stop for quick and precise positioning- MEC / mechanical feed
From 340,87 € - CMT663.101.11
This innovative CNC router bit offers you an endless range of possibilities for V-Groove, miter folds, signmaking, lettering and chamfer edges. The tool mounts a high grade HWM reversible knife ideal for general purpose, chipboard and plywood, but a higher quality is available for laminated and MDF material.
From 204,03 € -
- ME246WS-01
- Cutter head to produce 45° chamfers in solid wood, plywood and all kinds of panels- Reversible carbide knivesn no front edge cutting- MEC / mechanical feed
From 340,87 € - ME400WS-01
- Continuous adjustable angle cutter head range to 45° towards top and to 90° towards bottom- To produce chamfers and raised panels in solid wood and laminates- Steel body with reversible carbide knives, 4 cutting edges- MEC / mechanical feed
From 991,20 € - CMT663.201.11
For jointing, rebating and chamfering of solid wood and wooden boards. Suitable for CNC router machines and stationary router machine with manual or mechanical feed.
From 798,81 € -
- ME500WS-01
- For facing, rounding or chamfering, top and bottom, in all sorts of wood and panels- Using the same body (size 1 or 2) you can mount interchangeable carbide knives for chamfering or rounding with different radii- Peripheral cutting only, no front edge cutting- MEC / mechanical feed - Insert knives not supplied
From 491,11 € - ME215WS-01
- For roundover or chamfer profiles, top and bottom, in all kinds of wood or panels- Cutter head with knives that can be changed for roundover and chamfer profiles using the same cutter head- MEC / mechanical feed
From 389,67 € - PO028WS-01
- Execution: Body of 2 + 2 decomposed cuts with axis angle. Right hand rotation for mechanical feed.- Application: for profiling stair rails, handrail on CNC machine with horizontal aggregate- -Nmax. 8,000 rpm-1- Profiled cut with standard profiled knives
From 857,47 € -
- CMT616
This unique system includes a tool body with 22 profile knives designed for multiple applications on your CNC routers. Ideal for MDF, laminates, veneers, plastic, wood and solid surface materials.
From 132,56 € -
- CMT615-COUTEAU
Extremely precise bits to make MDF panel doors for kitchens and bathrooms. Each bit is made from bar stock steel and the highest quality tungsten materials.
From 87,91 € - CMT616-COFFRET
This unique system includes a tool body with 22 profile knives designed for multiple applications on your CNC routers. Ideal for MDF, laminates, veneers, plastic, wood and solid surface materials.
From 794,31 € - CMT615.004.01
Open some new doors with CMT. Our 4-piece set includes the most popular profile to make MDF panel doors for kitchens and bathrooms. Each bit is made from bar stock steel and is equipped with 5 different profile knives allowing enormous possibilities for easy and economical construction. The highest materials, the lowest tolerance in balancing and the...
From 1 009,51 €
Bits with carbide knives
Filter by:
Last Posts
-
Knife sharpening angle adjuster KS-123 Tormek
Set the perfect sharpening...
-
-
-
-
