Отправка в тот же день для всех заказов, размещенных до 14:00 по всей Европе с использованием DPD
Нет товаров
Цены указаны с учетом НДС
Товар добавлен в корзину
Товаров в корзине: 0. Сейчас в корзине 1 товар.
Lettering, "V" Groove and chamfer bits
14 товаров.
CMT8-949BThe ideal bit for routing signs. CMT has designed a bit with a 60° curved profile, a 3,2mm (1/8”) radius and a flattened bottom to make relief letter-making easy and accurate. This exclusive design allows you to efficiently level off the area around the base of the letter and bevel the letter edges to eliminate aggravating splintering. The top bearing...
From 59,81 €- CMT7-8-949
The ideal bit for routing signs. CMT has designed a bit with a 60° curved profile, a 3,2mm (1/8”) radius and a flattened bottom to make relief letter-making easy and accurate. This exclusive design allows you to efficiently level off the area around the base of the letter and bevel the letter edges to eliminate aggravating splintering.
From 49,75 € - CMT7-851B
This CMT bit is ideal for making bowls, trays, boxes, cutting boards or any other specialty or craft item. The round corner of the bit shapes the inner radius while the sides and bottom create the smooth flat surfaces. Makes pattern work quick and easy. Bowl and tray bits with top bearings are great for pattern work. Use them to create raised sign...
From 56,94 € - CMT7-8-951
This CMT bit is ideal for making bowls, trays, boxes, cutting boards or any other specialty or craft item. The round corner of the bit shapes the inner radius while the sides and bottom create the smooth flat surfaces. Makes pattern work quick and easy..
From 50,02 € - CMT7-8-915
These double cutting edge CMT bits offer an almost endless range of woodworking possibilities. Make clean, perfect cuts in panels, drawer fronts or even plasterboard panels; chamfer edges or engrave beautiful lettering. Like all CMT bits, they are made of super strength Fatigue Proof® steel with carbide-tipped cutting edges and are coated with our...
From 30,86 € - CMT7-8-915B
These double cutting edge CMT bits offer an almost endless range of woodworking possibilities. Make clean, perfect cuts in panels, drawer fronts or even plasterboard panels; chamfer edges or engrave beautiful lettering. Top bearing allows for several template options. Like all CMT bits, they are made of super strength Fatigue Proof® steel with...
From 48,55 € - CMT915
ALUCOBOND® plus composite panels can be shaped using a very simple processing method. The technique, called the routing and folding method, enables a fabricator to produce shapes of various kinds and sizes. A V-shaped groove is routed on the reverse side of the ALUCOBOND® plus composite panel using a "V" groove router bit. A thin layer of the core...
From 49,60 € - CMT665
Conical scoring blade for digitally controlled machines, to cut the plated side of the panel and prevent splinters when formatting.
From 37,93 € - CMT7-8-958
These new bits will allow you to make fine grooves and incisions with laser precision. Featuring bevel edges, these tools produce a nice effect in a single run. Raise the bits to make a fine point incision or bold highlighted lettering. The micrograin carbide cutting edge guarantees long-lasting performance.
From 40,96 € - CMT965
Router bits featuring 2 carbide-tipped cutting edges for producing double rebates on wood and wood composites. Designed for accepting library/bookcase shelving strips or for accommodating hardware into your window slots.
From 45,91 € - CMT703-4-5-903-4-5
From a gently beveled edge to decorative chamfers in a variety of materials, CMT offers smooth results.
From 28,16 € - CMT7-8-936-8-957
CMT chamfer bits can cut clean, accurate bevels and chamfers and are great for edge work or for making perfectly aligned multi-sided containers, boxes and other decorative projects. See illustration below for examples. Can be used for working larger scale projects such as beams and columns with excellent results.
From 36,83 € - CMT659-658
Bevel and Chamfer trim bits with two replaceable knives fixed by special Torx screws. The knives are sharpened on all 4-sided sharpened and provide three extra new edges. Guided bevel and chamfer trim bits type 659 are equipped with the ball bearing guides. Type 658 is unguided. For specialist applications requiring economy of replaceable tips. For...
From 70,24 € - CMT836
Build beautiful planters, boxes and other multi-sided pieces with this handy set. Why cut imperfect angles on your table saw when it's so much easier and accurate to use the CMT Chamfer set? Our solution to accurate polygon construction includes 5 anti-kickback, carbide tipped bits in the most popular angles - 11-1/4°, 15°, 22-1/2°, 30° and 45°. No...
From 284,26 €
Lettering, "V" Groove and chamfer bits
- Bits for straight cuts
- Flush trim and profiler bits
- Rebating bits
- Bits for grooves
- Bits for joinery
- Dovetail bits
- Lettering, "V" Groove and chamfer bits
- Deep profile bits
- Fillet/quarter round bits
- Profiled bits
- Multi-profile bits
- Bits for panels
- Bits for composite materials
- Bits for locks
- Box of bits
- FOZ range straight cut bits
Filter by:
Last Posts
-
-
Guide to Sharpening an Axe with a Tormek Sharpener
Sharpening an axe with precision is crucial for ensuring its effectiveness and extending its lifespan. Using a...
-
Tormek sharpeners
The professional sharpeners from the Swedish brand Tormek are renowned for their quality and...
-
Choosing a saw blade for a power tool
What saw blade to choose for your power tool based on the material to be cut and the diameter of the blade?
-
What are the 10 portable electric machines that one must have in their workshop?
Here are the 10 portable electric machines that are recommended to have in one's workshop for woodworking.
