Отправка в тот же день для всех заказов, размещенных до 14:00 по всей Европе с использованием DPD
Нет товаров
Цены указаны с учетом НДС
Товар добавлен в корзину
Товаров в корзине: 0. Сейчас в корзине 1 товар.
Биты для композитных материалов
Откройте для себя наши 16 ссылок в этой категории : Биты для композитных материалов
Solid surface rounding over bits
CMT8-980.5Use these bits to create a traditional roundover edge on solid surface countertops. Equipped with a non-marring Delrin® bearing to protect the finished edges. For use on hand-held portable routers.
From 47,11 €-
Solid surface decorative edge profile router bits
CMT8-980.521Create elegant countertops with flawless results. Features a non-marring Delrin® bearing to protect the finished edges. For use on hand-held portable routers.
From 131,70 € -
Surfacing cutter for composites
CMT8-922.036-sided cutter to cut into pieces.Removes material evenly to shape and customise solid composite surfaces.Curved cutting edges to create very smooth edges and facility cleaning. For hand-held portable routers.
From 101,64 € -
Solid surface rounding over bowl router bits
CMT8-966.601-602-8-980.541These bits roundover and trim the countertop edges after the bowl is mounted. Can be used with the CMT 880.551.11 bevel cutter for a flush cut-out between the countertop and installed undermount bowl. For use on hand-held portable routers. Features a non-marring Delrin® bearing to protect the finished edges. Special angled Delrin® sleeve on the bearing of...
From 104,28 € -
Solid surface rounding over bowl router bits (ogee profile)
CMT8-980.542These bits roundover and trim the countertop edges after the bowl is mounted. Can be used with the CMT 8/980.551.11 and 8/966.501.11 bevel cutter for a flush cut-out between the countertop and installed undermount bowl. For use on hand-held portable routers. Features a non-marring Delrin® bearing to protect the finished edges.
From 107,02 € -
Solid surface bevel bowl bits
CMT8-966.501-8-980.551These bits are designed for undermount applications joining the countertops and sink bowls with a 10 (degree) beveled edge. Can be used with the 880.541.11 and 880.542.11 for complete undermount applications. For use on hand-held routers. Features a non-marring Delrin® bearing to protect the finished edges. Special angled Delrin® sleeve on the bearing of...
From 73,62 € -
Solid surface bevel router bits
CMT8-981.521Edge profile bit designed to create a 15° bevel on solid surface countertops. Can also be used for European type topmount installation with sinks and bowls. For use on hand-held portable routers.
From 55,24 € -
Solid surface cut and plug repair set
CMT9-881.541Special carbide-tipped bits to be used on solid surface for repairing your ruined surfaces. To repair, create the plug with the plug cutter first, then use the other bit to easily make the hole. Your surfaces will look like new. To be used on hand-held routers or CNC machines.
From 430,42 € -
4-wing cut out slot cutters for solid surface
CMT8-922.033BTools featuring specially formulated carbide-tipped cutting edges for cutting your solid surface undermount bowls. For use on hand-held portable routers. Bits feature a non-marring Delrin® bearing to protect your surfaces.
From 123,78 € -
Solid surface no-drip router bits
CMT8-981.501This bit is designed to create "no-drip" edges on kitchen and vanity counter tops. Designed for hand-held portable routers on applications where a guide bearing cannot be used. This one bit will cut both the outer and inner profiles creating slightly raised edge, controlling spilled liquids.
From 45,59 € -
Solid surface no-drip router bits
CMT8-980.531This bit is designed to create "no-drip" edges on kitchen and vanity counter tops. Designed for hand-held portable routers on applications where a guide bearing cannot be used. This one bit will cut both the outer and inner profiles creating slightly raised edge, controlling spilled liquids.
From 63,36 € -
Solid surface wavy joint router bits
CMT8-981.531These bits are ideal for making strong joints on any solid surface, thanks to a wider area for glue.
From 46,91 € -
Solid surface drainboard router bits
CMT8-981.511-512This bit is ideal for creating custom drainboard patterns in solid surface countertops. For use on hand-held portable routers.
From 39,40 € -
Solid surface inlay router bits
CMT8-980.511-512-513Add a decorative wood, plastic or metal inlay to solid surface countertops. Equipped with a non-marring Delrin® bearing to protect the finished edges. For use on hand-held portable routers.
From 43,15 € -
Solid surface sink and trim bits
CMT8-980.57Trim a sink cutout flush with the bowl in stages using these "over-hang" and flush trim bits in tandem. These "overhang" bits are equipped with Delrin ® bearings that are tapered to match the slope of the bowl's side.
From 49,65 € -
Solid surface sink and trim bits with insert knives and...
CMT8-980.56Trim a sink cutout flush with the bowl in stages using these "over-hang" and flush trim bits in tandem. These "overhang" bits are equipped with Delrin ® bearings that are tapered to match the slope of the bowl's side. A first pass with the appropriate overhang bit cleans the cutout edge, leaving a very slight overhang at the underside of the counter. A...
From 74,83 €
- Биты для прямых пропилов
- Фиксированные триммеры и профилировщики
- Биты с фальцем
- Биты для пазов
- Биты для столярных работ
- Биты «ласточкин хвост»
- Надпись, V-образные фрезы для обработки канавок и фасок.
- Биты глубокого профиля
- Филейные/четвертькруглые биты
- Профилированные биты
- Многопрофильные биты
- Биты для панелей
- Биты для композитных материалов
- Биты для замков
- Коробка бит
- Биты с прямой нарезкой серии FOZ
Filter by:
Last Posts
-
The Importance of a Well-Sharpened Knife in the Kitchen
Discover how to sharpen your kitchen knives optimally with a sharpening machine.
-
Японские пилы Takagi Shark Saw: Союз традиций и технологий для идеальных резов
Японские пилы Takagi, особенно серия Shark Saw, известны своей эффективностью и точностью.
-
Knife sharpening angle adjuster KS-123 Tormek
Set the perfect sharpening...
-
-
