Отправка в тот же день для всех заказов, размещенных до 14:00 по всей Европе с использованием DPD
Нет товаров
Цены указаны с учетом НДС
Товар добавлен в корзину
Товаров в корзине: 0. Сейчас в корзине 1 товар.
Биты
Откройте для себя наши 258 ссылок в этой категории : Биты
Panalign strips
CMT-PNLBeautiful panel doors can be ruined by a poorly-aligned panel. Next time, slip panalign strips into the rails to keep panels perfectly centred while allowing for expansion. Unlike carpet foam, which eventually loses elasticity and ceases to work, the rubber in panalign strips is specially designed to spring back indefinitely. The rectangular shape makes...
From 10,76 €-
-
-
Solid carbide router cutters
CMT174-01Used for drilling, grooving or jointing on solid wood and wood composites. Can be used on machining centres, CNC routers and hand-held routers equipped with chucks or adaptors.
From 30,06 € -
Router cutters
CMT174-02Used for drilling, grooving or jointing on solid wood and wood composites. Can be used on machining centres, CNC routers and hand-held routers equipped with chucks or adaptors.
From 28,02 € -
Router cutters
CMT177-01Used for grooving, jointing and general routing operation on solid wood, wood composites, plastics and laminates. Can be used on machining centres, CNC routers and hand-held routers.
From 38,58 € -
Double-bearing spiral flush trim router bits
CMT190B-191B-192BThe new CMT solid carbide spiral flush trim bits are manufactured with a special super-micrograin formulation that has increased hardness with a higher transverse rupture point. Combined with the spiral cutting angle, the new CMT solid carbide spiral flush trim bits with double bearing allow the cabinet maker to sheer wood and wood products cleanly,...
From 49,03 € -
5 piece spiral bit sets
CMT191-192CMT is proud to offer you these new sets of high quality solid tungsten carbide upcut and downcut spiral bits in the most popular diametres. The new formulated super micrograin composition guarantees extremely sharp long-lasting cutting edges, whereas the spiral layout allows for a more efficient chip ejection. In addition these bits stay cooler during...
From 311,01 € -
Round nose solid carbide upcut spiral bits
CMT199A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer.
From 37,47 € -
Dowel drills for mafell® and hand-held routers
CMT312These drill bits are made with high-strength steel in order to work with high speed rotation. They are perfect to bore all materials like solid wood, wood and composites, plastic and laminated with hand-held routers and MAFELL® machine model DD40.
From 23,33 € -
Countersinks with threaded shank
CMT350For use with spiral bits featuring parallel shank.
From 61,86 € -
Countersinks with threaded shank
CMT351For use with spiral bits featuring parallel shank.
From 62,45 € -
Router bits for domino® joining machines by festool®
CMT380To be used on Domino® machines to rout slots on solid wood and wood composites.
From 33,10 € -
Carbide Boring bits with parallel shank
CMT392For use on drilling machines and hand-held routers in solid wood, wood composites and plastic laminated materials. Ideal for hinges.
From 24,88 € -
Boring bit and plug cutter sets
CMT500.001-02-03We offer a wide range of boring bits and plug cutters in the most popular diametres. If you need to bore or to make plugs in softwood these sets are with you need!
From 233,44 € -
-
Adaptors with threaded shank for interchangeable bits
CMT503Used on boring machines with adaptor chucks.For use with the following parts : 501 HW.
From 34,12 € -
Adaptors with threaded shank for interchangeable bits
CMT506Used on boring machines with adaptor chucks.For use with the following parts : 501 HW.
From 34,42 € -
Adaptors with parallel shank for interchangeable bits
CMT509-532-533Used on boring machines with adaptor chucksFor use with the following parts : 501 HW.
From 15,74 € -
Adaptors with parallel shank for quick change drills
CMT511Used on boring machines with adaptor chucks.For use with the following parts : 501 HW.
From 15,33 € -
Carbide Boring bits with parallel shank
CMT512-01Used for drilling blind holes on solid wood, wood composites and plastic laminated materials. Ideal for hinges.
From 38,79 € -
Steel Boring bits with parallel shank
CMT512-02Used for drilling blind holes on solid wood, wood composites and plastic laminated materials. Ideal for hinges.
From 13,30 € -
5 Pieces boring bit set for hinges
CMT512-COFFRET1Used for drilling blind holes in solid wood, wood composites and plastic laminated materials. Ideal for hinges.
From 213,13 € -
5 steel Pieces boring bit set for hinges
CMT512-COFFRET2Used for drilling blind holes in solid wood, wood composites and plastic laminated materials. Ideal for hinges.
From 77,07 € -
Carbide Boring bits with parallel shank
CMT513For use on drilling machines and hand-held routers in solid wood, wood composites and plastic laminated materials. Ideal for hinges.
From 81,05 € -
Carbide Boring bits with parallel shank
CMT514For use on drilling machines and hand-held routers in solid wood, wood composites and plastic laminated materials. Ideal for hinges.
From 82,65 € -
Drill bits for ANUBA® hinges
CMT515-01Used for drilling blind holes in soft and hardwood. For ANUBA® hinges.
From 16,86 € -
Drill bits for ANUBA® hinges, parallel shank with driving...
CMT515-02Used for drilling blind holes in soft and hardwood. For ANUBA® hinges.
From 0,00 € -
Drill bits with countersink for screw joints
CMT515-03Used for drilling blind holes in soft and hardwood.
From 9,64 € -
90° Countersink with parallel shank
CMT515-04To be used with helical drill bits with fixing identical to the diameter of the opening of the countersink
From 57,06 € -
Drill Bits with 90° countersink set
CMT515AUsed for drilling holes in soft, hardwood and wood composites.
From 70,37 € -
-
Brad point bits
CMT517-01Used for drilling holes in soft and hardwood. Long-lasting cutting performance.
From 2,23 € -
Brad point bits
CMT517-02Used for drilling holes in soft and hardwood. Long-lasting cutting performance.
From 3,75 € -
Brad point bit sets
CMT517-COFFRETAn economical collection of the most popular sized brad points. Safely packaged in a reusable plastic case for easy storage and inventory.
From 20,21 € -
-
-
-
Drill Bits with 45° countersink set
CMT521AUsed for drilling holes in soft, hardwood and wood composites.
From 69,25 € -
-
-
-
-
Rosette cutters
CMT531To be used on drill presses and drilling power tools at low RPM. We recommend clamping your workpiece mechanically during boring operations.
From 154,44 € -
Adaptors with tapered shank for interchangeable bits
CMT534Used on CNC machines or hand-held routers equipped with adaptor chucks.For use with the following parts : 501 HW.
From 60,79 € -
Forstner Bits
CMT537-01Used to drill precise flat bottom holes with no chipping in any softwood thickness.
From 11,78 € -
Forstner bits
CMT537-02Used to drill precise flat bottom holes with no chipping in any softwood thickness.
From 11,58 € -
5 Piece Forstner bit set
CMT537-COFFRETWe offer a wide range of Forstner bits in the most popular diametres. These bits are available separately or in beautiful wooden sets. The high performance stagger tooth design on the bits with larger diametres allows for sharp holes with straight sides and flat bottoms. Bits available for drill presses, electric and cordless drills and suitable to work...
From 35,44 € -
Brad point bits with parallel shank
CMT540Used for drilling blind holes on solid wood, wood composites or plastic laminates.To be inserted on hand-held routers.
From 25,18 € -
541 - Stop collars
CMT541-1Stop collars with precision clamping nut and key for quick and easy assembly.
From 5,28 € -
541 - Stop collars with sleeve
CMT541-2Stop collars with Delrin® sleeve - Boring depth limiter.- Precision work with Delrin® sleeve, which protects the workpiece.- Key included.- Quick and easy assembly.
From 14,11 € -
Brad point bits
CMT542-535Used for drilling deep holes in soft and hardwood. Ideal for making hidden shelves.
From 14,72 € -
Straight router bits with insert knives
CMT600.005.01Ideal for fast plunge cuts and other grooving applications. Use these single edge bits in CNC or portable routers for work in laminated stock, soft and hardwood.
From 479,16 € -
Straight router bits with insert knives
CMT651-652Ideal for fast plunge cuts and other grooving applications. Use these single edge bits in CNC or portable routers for work in laminated stock, soft and hardwood.
From 0,00 € -
Straight router bits with insert knives for laminates
CMT652Straight trimmer bits with one replaceable knife fixed by Torx screw. For economical specialist application requiring low down-time. The 29,5x9x1,5mm knife provide a 40mm (1-37/64”) cutting length when operating in multiple passes. For routing, trimming and grooving on board materials (laminated chipboards, worktop panels and MDF). For use on portable...
From 74,02 € -
Pattern router bits with insert knives
CMT652BStraight router bits with on replaceable knife fixed by a Torx screw. For economical specialist applications requiring low downtime. They are equipped with top bearing for template use. For routing, trimming and grooving in board materials (laminated chipboards, worktop panels, MDF). For use on portable routers.
From 99,41 € -
Straight router bits with insert knives
CMT653-01Straight router bits with on replaceable plunging knife and side knife fixed by a special Torx screw. The tool bodies are precisely balanced. For finishing, routing, plunging and grooving on board materials (laminated chipboards and MDF) and hardwood. For use on portable routers.
From 105,90 € -
Straight router bits with insert knives
CMT653-02Straight router bits with on replaceable plunging knife and side knife fixed by a special Torx screw. The tool bodies are precisely balanced. For finishing, routing, plunging and grooving on board materials (laminated chipboards and MDF) and hardwood. For use on CNC machining centres.
From 100,52 € -
Straight router bits with insert knives
CMT654Straight router bit with two replaceable knives fixed by special Torx screws. Their blades are sharpened on the top with 3° angle for better plunging operations.
From 115,04 € -
Straight router bit with insert knives
CMT655Straight router bit with two replaceable knives fixed by special Torx screws. Their blades are sharpened on the top with 3° angle for better plunging operations.
From 66,10 €
- Фрезы CMT Orange Tools®
- Биты для прямых пропилов
- Фиксированные триммеры и профилировщики
- Биты с фальцем
- Биты для пазов
- Биты для столярных работ
- Биты «ласточкин хвост»
- Надпись, V-образные фрезы для обработки канавок и фасок.
- Биты глубокого профиля
- Филейные/четвертькруглые биты
- Профилированные биты
- Многопрофильные биты
- Биты для панелей
- Биты для композитных материалов
- Биты для замков
- Коробка бит
- Биты с прямой нарезкой серии FOZ
- Сверла по дереву
Filter by:
Last Posts
-
The Importance of a Well-Sharpened Knife in the Kitchen
Discover how to sharpen your kitchen knives optimally with a sharpening machine.
-
Японские пилы Takagi Shark Saw: Союз традиций и технологий для идеальных резов
Японские пилы Takagi, особенно серия Shark Saw, известны своей эффективностью и точностью.
-
Knife sharpening angle adjuster KS-123 Tormek
Set the perfect sharpening...
-
-
