Отправка в тот же день для всех заказов, размещенных до 14:00 по всей Европе с использованием DPD
Нет товаров
Цены указаны с учетом НДС
Товар добавлен в корзину
Товаров в корзине: 0. Сейчас в корзине 1 товар.
Биты
Откройте для себя наши 258 ссылок в этой категории : Биты
Straight router bits with indexable knives for laminates
CMT656This bit type is equipped with top bearing for template use. For finishing, routing and grooving in board materials (laminated chipboards, MDF) and hardwood. Fors use on portable routers or CNC machining centres.
From 123,79 €- -5%
Flush trim bits with insert knives
CMT657.1Flush trim bits with two replaceable knives fixed by special Torx screws. The blades are 2 sided sharpened and can give extra new edges.
From 67,23 € 70,77 € -5% -
Flush trim bits with insert knives
CMT657.9Flush trim bits with two replaceable knives fixed by special Torx screws. The blades are 2 sided sharpened and can give extra new edges.
From 77,37 € -
Pattern/flush trim router bits with insert knives
CMT657BFlush trim bit combined with pattern bits fixed by special Torx screws. The blades are two-sided sharpened and can give extra new edges. 657 guided flush trim bits are equipped with top and bottom ball bearing guides. For flush and finish operations.
From 83,57 € -
Chamfer bits with insert knives
CMT659-658Bevel and Chamfer trim bits with two replaceable knives fixed by special Torx screws. The knives are sharpened on all 4-sided sharpened and provide three extra new edges. Guided bevel and chamfer trim bits type 659 are equipped with the ball bearing guides. Type 658 is unguided. For specialist applications requiring economy of replaceable tips. For...
From 65,90 € -
Rabbeting bits with insert knives
CMT660Primarily for use with portable routers, these rabbeting bits can be used with various bearings to produce a wide range of cut depths. Inserts are sharpened on all 4 sides.
From 0,00 € -
Grand rabbeting router bits with insert knives
CMT660.9Primarily for use with portable routers, these rabbeting bits can be used with various bearings to produce a wide range of cut depths. Inserts are sharpened on all 4 sides. The collar sets will enable you to produce 17 different rabbet sizes including rabbets for under-size plywood applications. For rabbet sizes over 12,7mm (1/2”) we suggest cutting in...
From 137,78 € -
Roundover bits with insert knives
CMT661.11Roundover bits with two replaceable knives fixed by special Torx screws. The blades are 2 sided profiled and give high economy of your work with laminates. Roundover bits type are equipped with the ball bearing guides. For precision work on laminates. Radius 2mm (5/64”) or 3mm (1/8”) is for rounded 2mm (5/64”) or 3mm (1/8”) ABS edges. Radius 5mm (13/64”)...
From 0,00 € -
Roundover bits with insert knives
CMT661.41Roundover bits with two replaceable knives fixed by special Torx screws. The blades are 4 sided profiled and give high economy of your work with laminates. For precision work on laminates. Radius R2 (5/64”) or R3 (1/8”) is for rounded 2mm (5/64”)) or 3mm (1/8”) ABS edges, MDF and wood; same bits radius 1mm (1/32”), 1,5mm (1/16”), 2mm (5/64”) and 3mm...
From 115,14 € -
V-grooving & signmaking router bits with indexable knives...
CMT665Conical scoring blade for digitally controlled machines, to cut the plated side of the panel and prevent splinters when formatting.
From 36,05 € -
15 piece router bit sets
CMT7-8-900.001BOX IS PROTECTED BY US PATENT NO. 7,703,605 AND BY OTHER FOREIGN PATENTS.CMT's beautiful sets are the perfect companions for the professional craftsman. These sets offer a selection of organized and ready-to-use straight and profile bits; added value for any woodworker! Each bit is made of Fatigue Proof® steel, micrograin carbide and is coated with orange...
From 453,37 € -
Mortising router bits
CMT7-8-901Equipped with thick carbide tips and negative shear angle design, CMT Mortising bits guarantee you a flawless performance. Mortise perfect hinges with no splintered edges or rough bottoms. They also make an easy job of piece work in both natural wood and wood composites. Fit most popular mortising jigs. The CMT mortising bit with top bearing guide is the...
From 23,68 € -
Mortising router bits
CMT7-8-901BEquipped with thick carbide tips and negative shear angle design, CMT Mortising bits guarantee you a flawless performance. Mortise perfect hinges with no splintered edges or rough bottoms. They also make an easy job of piece work in both natural wood and wood composites. Fit most popular mortising jigs. The CMT mortising bit with top bearing guide is the...
From 35,54 € -
Flush trim router bits
CMT7-8-906-01We have designed a series of truly indispensable bits available in a wide range of sizes for your woodworking needs and your most difficult projects. For precision work on laminates or quick template work with excellent finishing.
From 40,97 € -
Super-duty flush trim router bits
CMT7-8-906-02These new super duty bits represent the finest of the extensive line of CMT flush trim bits with ball bearing guides. A negative shear angle cutting edge and 19mm (3/4”) cutting diameter set CMT flush trim bits apart from standard bits. Work quickly and safely to get a superior finishing with absolute minimal chipping.
From 43,76 € -
DP flush trim router bits for laminates
CMT7-8-906-03These new super duty DP (polycrystalline diamond) bits represent the ultimate in the extensive line of CMT flush trim bits. Investing in CMT DP flush trim bits to save time and money, as they last at least 40 times longer than conventional carbide tipped flush trim bits.
From 155,66 € -
3 in 1 flush trim bits for MDF/laminates
CMT7-8-907Perfect trimming with the conical edges!Thanks to the innovative conical edges of this bit you will always get perfect cuts even after re-sharpening. In fact, the most popular problem you have with the standard flush trim bits is the undersize diameter after re-sharpening which leaves the mark on the material; now with the new CMT construction you could...
From 35,94 € -
Straight router bits, short series
CMT7-8-911If you are looking to get the most out of your time and money through more efficient production, but want nothing less than a beautiful clean edge on your finished piece, then you definitely must include CMT straight bits in your collection. These razor-sharp, double-faced cutters perfectly synthesize the characteristics and advantages that define quality...
From 27,11 € - -5%
Pattern router bits, short series
CMT7-8-911BWhether you are a full time professional or a part time woodworking enthusiast, discover the unlimited possibilities of template routing with a CMT pattern bit. Pair up these double fluted bits with your choice of template to produce cabinet and furniture pieces, signs, toys and any other creative projects. Carbide tipped to last longer, CMT pattern bits...
From 38,78 € 40,82 € -5% -
Straight router bits, long series
CMT7-8-912If you are looking to get the most out of your time and money through more efficient production, but want nothing less than a beautiful clean edge on your finished piece, then you definitely must include CMT straight bits in your collection. These razor-sharp, double-faced cutters perfectly synthesize the characteristics and advantages that define quality...
From 31,93 € -
Pattern router bits, long series
CMT7-8-912BWhether you are a full time professional or a part time woodworking enthusiast, discover the unlimited possibilities of template routing with a CMT pattern bit. Pair up these double fluted bits with your choice of template to produce cabinet and furniture pieces, signs, toys and any other creative projects. Carbide tipped to last longer, CMT pattern bits...
From 43,15 € -
Round nose router bits
CMT7-8-914Personalize your doors, drawer fronts, panels or any surface you choose with your own signature motif. CMT round nose bits in solid carbide or with carbide tipped flutes let you create engraving in any wood or wood product. We offer a complete selection of diameters and cutting depths so you can achieve the effects you want. Mounted on your router table,...
From 31,17 € -
Round nose router bits
CMT7-8-914BPersonalize your doors, drawer fronts, panels or any surface you choose with your own signature motif. CMT round nose bits in solid carbide or with carbide tipped flutes let you create engraving in any wood or wood product. We offer a complete selection of diameters and cutting depths so you can achieve the effects you want. Mounted on your router table,...
From 43,76 € -
V-Grooving router bits (90°)
CMT7-8-915These double cutting edge CMT bits offer an almost endless range of woodworking possibilities. Make clean, perfect cuts in panels, drawer fronts or even plasterboard panels; chamfer edges or engrave beautiful lettering. Like all CMT bits, they are made of super strength Fatigue Proof® steel with carbide-tipped cutting edges and are coated with our...
From 30,86 € -
V-Grooving router bits (90°)
CMT7-8-915BThese double cutting edge CMT bits offer an almost endless range of woodworking possibilities. Make clean, perfect cuts in panels, drawer fronts or even plasterboard panels; chamfer edges or engrave beautiful lettering. Top bearing allows for several template options. Like all CMT bits, they are made of super strength Fatigue Proof® steel with...
From 45,49 € -
Panel pilot router bits with guide
CMT7-8-916How long do you spend making openings in paneling, drywall, siding, doors or windows? With the CMT panel pilot bit, the job just got quicker. The point plunges smoothly and easily and the carbide edges cut clean and fast. All of this adds up to accurate cuts in less time and with less effort - great for trimming Formica®, veneer and other laminates.Safety...
From 25,14 € -
Dovetail router bits
CMT7-8-918The beautifully crafted dovetail joint is a classic that appeals to both professionals and novices alike. Admired for its attractiveness in box and exposed joint projects, the dovetail is remarkably strong and functional. CMT dovetail bits are designed to fit all popular jigs including Leigh, Keller, JoinTECH and Omnijig systems. You are sure to find the...
From 33,51 € -
Combination trimmer bits
CMT7-8-921Work to your highest standards with the CMT combination trimmer bits. Now you can cut, trim and bevel all laminated without changing the bits. Achieve great results in straight or angled cuts on both soft and hardwood. Three popular sizes, each with carbide-tipped cutting edges for efficient bevel and straight trimming.Notice : these bits must be used...
From 27,62 € -
Slot cutters
CMT7-8-922A-BUses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, T-molding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of many arbors which include...
From 42,04 € -
-
Ovolo router bits
CMT7-8-927CMT put the work capacity of several different bits all into one. The perfect bit for furniture makers, the CMT ovolo allows you to make beautiful beadwork, edgework and veins. Use these bits on automated router systems or with a fence to produce a wide variety of single and double bead profiles and roundovers like those illustrated below by simply...
From 36,67 € -
Rabbeting router bits
CMT7-8-935CMT carbide-brazed rabbeting bits are fast and accurate. You can quickly produce inset doors and drawer fronts, make strong rabbet joints, mill perfect tongue and groove joints or any number of other jobs that before were time consuming and difficult. You can even re-groove old window frames to fit insulated glass panes with the extra-long CMT 19mm (3/4”)...
From 43,24 € -
Rabbeting router bit sets
CMT7-8-935.001These rabbeting sets allow you to make an endless number of cuts by adjusting the cutting height on your router and changing the bearing on the bit.Be sure to keep the black bearing washer right side up to correspond with the bearing rotation when reassembling the bearing. Improper reassembly can cause the screw to come loose. Each set comes complete with...
From 98,26 € -
Chamfer router bits
CMT7-8-936-8-957CMT chamfer bits can cut clean, accurate bevels and chamfers and are great for edge work or for making perfectly aligned multi-sided containers, boxes and other decorative projects. See illustration below for examples. Can be used for working larger scale projects such as beams and columns with excellent results.
From 34,73 € -
Cove router bits
CMT7-8-937Make simple or elegant furniture, doors and drawer fonts by adding a final touch with CMT cove bits. Join them together with a CMT roundover bit and make perfectly fitting rule joints, ideal for drop leaf counter and table tops. These bits feature anti-kickback design, carbide-tipped cutting edges, Fatigue Proof® steel body and PTFE non-stick coating.
From 38,18 € -
Roundover router bits
CMT7-8-938The smaller bearing on the CMT Beading bits makes a delicate inset at the base of the cut, giving you the advantage of an extra decorative option. Be sure to keep the black bearing washer right side up to correspond with the bearing rotation when reassembling the bearing. Improper reassembly can cause the bit to unscrew. All CMT roundover bits have a...
From 37,47 € -
Beading router bits
CMT7-8-939Beading bits are similar to the roundover profile, but a smaller bearing produces a delicate inset at the base of the cut, giving you an extra decorative option. For a beading profile (code 7/8/939) simply change the bearing (791.002.00) on your roundover bits (code 7/8/938).Bits featuring 25,4mm (1”) radius are to be used only on router table.
From 39,80 € -
Roman ogee router bits
CMT7-8-940The roman ogee may be the most popular edge treatment in woodworking, and it is certainly one of the most beautiful. This bit includes all CMT bit features and produces a perfect rendition of classic design.Shop tips : for best results, multiple passes are recommended.
From 45,59 € -
Roman ogee router bits
CMT7-8-941This bit takes the Roman ogee a step further. The horizontal bead adds style and elegance to the traditional shape.Shop tips : for best results, multiple passes are recommended.
From 54,02 € -
Classical ogee router bits
CMT7-8-944CMT's classical ogee bits feature an inverted ogee profile, with the concave edge adjacent to the upper surface of the workpiece. A vertical bead was added to separate the curves and creates an eye-catching shape.Ship tips : for best results, multiple passes are recommended.
From 53,41 € -
Classical ogee router bits
CMT7-8-945CMT's classical ogee bits feature an inverted ogee profile, with the concave edge adjacent to the upper surface of the workpiece. A vertical bead was added to separate the curves and creates an eye-catching shape.Shop tips : for best results, multiple passes are recommended.
From 57,15 € -
Ogee with fillet router bits
CMT7-8-946Take a complete assortment of CMT ogee bits into your shop. These bits feature micrograin carbide edges, high strength steel and the trademarked orange non-stick PTFE coating.Shop tips : for best results, multiple passes are recommended.
From 57,06 € -
Ogee with fillet router bits
CMT7-8-947For a more-detailed profile, this bit adds an inset bead along the lower edge of the cut.Shop tips : for best results, multiple passes are recommended.
From 57,47 € -
Plunge ogee router bits
CMT7-8-948.7-8-948BYou will never run out of ideas with this creative bit. Add a classic touch to any edge or highlight door fronts and panels with decorative layered effects.
From 46,00 € -
Lettering router bits (60°)
CMT7-8-949The ideal bit for routing signs. CMT has designed a bit with a 60° curved profile, a 3,2mm (1/8”) radius and a flattened bottom to make relief letter-making easy and accurate. This exclusive design allows you to efficiently level off the area around the base of the letter and bevel the letter edges to eliminate aggravating splintering.
From 46,91 € -
Keyhole router bits
CMT7-8-950.001With the CMT keyhole bit you can make holes that keep your frames, plaques or any wall hanging perfectly straight and attached to the wall. The bit bores an entry hole in the wood, then proceeds to cut a 4,8mm (3/16”) hole and finishes by boring a larger opening under the surface. The perfect way to securely mount wall hangings on screws and nails.Safety...
From 40,57 € -
Bowl & tray router bits
CMT7-8-951This CMT bit is ideal for making bowls, trays, boxes, cutting boards or any other specialty or craft item. The round corner of the bit shapes the inner radius while the sides and bottom create the smooth flat surfaces. Makes pattern work quick and easy..
From 47,62 € -
Flush and V-groove router bits
CMT7-8-953An absolutely indispensable bit for making cabinets. CMT Flush and V-Groove bits allow you to make cabinet front frames in 25mm (1”) stock that fit perfectly with the sides. The added V-cutter feature makes a decorative groove along the hinge joint to hide the seam.Shop tips : for best results, leave less than 3mm (1/8”) overhang on cabinet front frames...
From 43,76 € -
Bead & bull nose router bits
CMT7-8-954CMT bull nose bits create beautifully finished edges on stair treads, window sills and shelves in a pass. Ad a final touch by using a cutter with a bead diameter wider than the stock thickness. CMT bull nose bits have bead diameters from 6,35mm (1/4”) to 25,4mm (1”) and each bit features carbide-tipped cutting edges, anti-kickback design and the orange...
From 40,41 € -
Laser point router bits (35°)
CMT7-8-958These new bits will allow you to make fine grooves and incisions with laser precision. Featuring bevel edges, these tools produce a nice effect in a single run. Raise the bits to make a fine point incision or bold highlighted lettering. The micrograin carbide cutting edge guarantees long-lasting performance.
From 38,99 € -
Ogee router bits
CMT7-8-959These profiles are the mirror image of the traditional roman ogee. They add a sharp defining details to the edges of cabinets and furniture, before rolling into a smooth convex shape.Shop tips : for best results, multiple passes are recommended.
From 50,26 € -
Ogee router bits
CMT7-8-960These bits are identical to the 7/8/959 series with the addition of an inset bead along the lower edge.Shop tips : for best results, multiple passes are recommended.
From 52,70 € -
Corner beading router bits
CMT7-8-961Make beautiful traditional beads and edge beads or turn old beads into new moldings with the new CMT corner beading bits with bearing. Featuring carbide-tipped cutting edges and orange PTFE non-stick coating, these bits provide excellent results on corner beads. Run the bead twice to form a complete corner bead.
From 46,40 € -
Cavetto edge mold router bits
CMT7-8-963.7-8-964The cavetto bit cuts beautiful, traditional profiles, but you may also use just a portion of the bit to cut a more simple and cleaner cove edge. This bit add a special touch to furniture pieces by making traditional cove profiles with top and bottom fillet grooves in any kind of wood and wood composites.Important : always assemble the black bearing heat...
From 48,57 € -
Decorative ogee router bits
CMT7-8-965-1This new CMT bit produces a classic single or double edged bead. Ideal for creating a marked decorative effect on panel, door and drawer work.
From 0,00 € -
Decorative ogee router bits
CMT7-8-965-2Make subtle decorative edges with this bit! Perfect for enhancing doors and drawer fronts, it will deliver smooth and flawless results. Carbide-tipped to ensure a clean, sharp and precise cut.
From 38,18 € -
Decorative ogee router bits
CMT7-8-965-3This new CMT bit produces a classic single or double edged bead. Ideal for creating a marked decorative effect on panel, door and drawer work.
From 37,47 € -
Classical bead router bits
CMT7-8-965BThis bit gives you even more decorative possibilities for panel and edge work. The bit design gives a wide flat bottom cut and a longer shank allows for a greater depth in the detail of the profile.
From 55,16 € -
Dovetail router bits
CMT7-818BThe beautifully crafted dovetail joint is a classic that appeals to both professionals and novices alike. Admired for its attractiveness in box and exposed joint projects, the dovetail is remarkably strong and functional. CMT dovetail bits are designed to fit all popular jigs including Leigh, Keller, JoinTECH and Omnijig systems. You are sure to find the...
From 0,00 € -
Combination trimmer router bits
CMT7-842.7-843Work to your highest standards with the CMT combination trimmer bits. Now you can cut, trim and bevel all laminated without changing the bits. Achieve great results in straight or angled cuts on both soft and hardwood. Three popular sizes, each with carbide-tipped cutting edges for efficient bevel and straight trimming.Notice : these bits must be used...
From 19,29 €
- Фрезы CMT Orange Tools®
- Биты для прямых пропилов
- Фиксированные триммеры и профилировщики
- Биты с фальцем
- Биты для пазов
- Биты для столярных работ
- Биты «ласточкин хвост»
- Надпись, V-образные фрезы для обработки канавок и фасок.
- Биты глубокого профиля
- Филейные/четвертькруглые биты
- Профилированные биты
- Многопрофильные биты
- Биты для панелей
- Биты для композитных материалов
- Биты для замков
- Коробка бит
- Биты с прямой нарезкой серии FOZ
- Сверла по дереву
Filter by:
Last Posts
-
The Importance of a Well-Sharpened Knife in the Kitchen
Discover how to sharpen your kitchen knives optimally with a sharpening machine.
-
Японские пилы Takagi Shark Saw: Союз традиций и технологий для идеальных резов
Японские пилы Takagi, особенно серия Shark Saw, известны своей эффективностью и точностью.
-
Knife sharpening angle adjuster KS-123 Tormek
Set the perfect sharpening...
-
-
