Отправка в тот же день для всех заказов, размещенных до 14:00 по всей Европе с использованием DPD
Корзина
0 Товар: Товары: (пусто)
Нет товаров
Определить Доставка
0,00 € НДС
0,00 € Итого, к оплате:
Цены указаны с учетом НДС
Товар добавлен в корзину
Количество
Итого, к оплате:
Товаров в корзине: 0. Сейчас в корзине 1 товар.
Стоимость: (вкл. НДС)
Стоимость доставки (вкл. НДС) Определить
НДС: 0,00 €
Итого, к оплате: (вкл. НДС)
Цена снижена! 
Perfect trimming with the conical edges!
Thanks to the innovative conical edges of this bit you will always get perfect cuts even after re-sharpening. In fact, the most popular problem you have with the standard flush trim bits is the undersize diameter after re-sharpening which leaves the mark on the material; now with the new CMT construction you could re-sharpen up to six times without any problem. Just remember to adjust your bit up or down.
Thanks to the innovative conical edges of this bit you will always get perfect cuts even after re-sharpening. In fact, the most popular problem you have with the standard flush trim bits is the undersize diameter after re-sharpening which leaves the mark on the material; now with the new CMT construction you could re-sharpen up to six times without any problem. Just remember to adjust your bit up or down.
33 Товаров
Spend 200,00 € more and get Free Shipping!
За этот товар не начисляются бонусные баллы, т.к. по нему уже имеется скидка.
3 in 1 new flush trim bits with Delrin® triangular bearings are your best partner for laminate trimming. In fact they solve 3 of the most common problems that occur in flush trimming in cabinet shops.
- 1) The anti-stick properties of the Delrin® bearing greatly reduces the likelihood of freezing of the bearing from glue.
- 2) The extended guide surface of the new Delrin® bearing will perfectly match the work surface without scratching like the steel bearing would. The Delrin® bearing also guarantees maximum stability.
- 3) The shear angle cutting edge reduces the need for filing.
3 in 1 bits are ideal on plastic laminates as well as aluminium laminates!
Bearing is patented. Patent no. D628,218.
- Extended guide surface.
- Non-freezing.
- Non-scratch surface.
- 1) The anti-stick properties of the Delrin® bearing greatly reduces the likelihood of freezing of the bearing from glue.
- 2) The extended guide surface of the new Delrin® bearing will perfectly match the work surface without scratching like the steel bearing would. The Delrin® bearing also guarantees maximum stability.
- 3) The shear angle cutting edge reduces the need for filing.
3 in 1 bits are ideal on plastic laminates as well as aluminium laminates!
Bearing is patented. Patent no. D628,218.
- Extended guide surface.
- Non-freezing.
- Non-scratch surface.
: Товар есть на складе 
: Последние товары на складе 
: Товар доступен вовремя (Срок выполнения под 10 дней)
| Ссылка | S | L | D | Rotation | l | В наличии | Цена | Количество | Заказ | ||
 | CMT90712811 | 8 | 54.2 | 12.7 | DROITE | 12.7 | 35,94 € Включая налог - 5% 34,15 € Включая налог | ||||
 | CMT70712811 | 6 | 54.2 | 12.7 | DROITE | 12.7 | 35,94 € Включая налог - 5% 34,15 € Включая налог | ||||
 | CMT80712811 | 6.35 | 54.2 | 12.7 | DROITE | 12.7 | 35,94 € Включая налог - 5% 34,15 € Включая налог | ||||
| | CMT90719011 | 8 | 59.3 | 19 | DROITE | 15.87 | 45,59 € Включая налог - 5% 43,31 € Включая налог | ||||
| | CMT70719011 | 6 | 59.3 | 19 | DROITE | 15.87 | 45,59 € Включая налог - 5% 43,31 € Включая налог | ||||
| | CMT80719011 | 6.35 | 59.3 | 19 | DROITE | 15.87 | 45,59 € Включая налог - 5% 43,31 € Включая налог | ||||
 | CMT80769011 | 12.7 | 65.7 | 19 | DROITE | 15.87 | 45,59 € Включая налог - 5% 43,31 € Включая налог |
В этой категории 27 товаров:
Products from the same manufacturer
-5%
Professional router table + Electric safety switch for...
CMT999.110.00_INTER From 1 417,85 € 1 492,48 €
Customers who bought this product also bought: