Отправка в тот же день для всех заказов, размещенных до 14:00 по всей Европе с использованием DPD
Нет товаров
Цены указаны с учетом НДС
Товар добавлен в корзину
Товаров в корзине: 0. Сейчас в корзине 1 товар.
Bits for panels
8 товаров.
CMT8-991.517These bits are designed for projects that require smaller panel doors. Use these bits with stock from 11mm (7/16”) to 17,4mm (11/16”) thick, and build doors as small as 70mm (2-3/4”) square.
From 181,62 €- CMT8-991.512
Designed for fine furniture construction, these bits mill a delicate 4,75mm (3/16”) thumbnail profile in stock from 15,8mm (5/8”) to 20,6mm (13/16”).
From 162,28 € - CMT8-991.5
A well-constructed door will bear the mark of a perfect joint-clean, exact and well-crafted for strength. For this project, the CMT male-female rail and stile sets are the perfect pair. Made to our specifications they match exactly; not simply approximated like standard reversible cutters. Choose the style of CMT rail and stile set that best suits your...
From 202,13 € - CMT8-991.521
The most innovative bit for the construction of doors and drawers. Two cutters are embodied in a unique bit to allow you to cut two perfectly joining profiles efficiently and effectively, and also to reduce costs by investing in a single CMT bit rather than multiple cutters. For use in stock from 18mm (11/16”) to 22,2mm (7/8”).Safety precautions : always...
From 160,03 € - CMT8-990.6
Mill raised panel doors and drawer fronts easily and economically with a CMT vertical raised panels in your router* and a sturdy 90° fence on your router table. Choose your favourite style from three of the most popular panel profiles.*Recommended for use on routers with a minimum speed of 1,7 KW (2-1/4 HP). Routers as low-powered as 1,1 kW (1-1/2 HP) can...
From 105,26 € - CMT8-990.5
Make classic raised panel doors with these CMT bits. They feature carbide cutting edges, our trademark orange coating and anti-kickback design for safety.Safety tips : these bits should be used between 10.000 and 12.000 RPM, three to five passes recommended. To be used with routers with at least 1,7 KW (2-1/4 HP).
From 137,78 € - CMT8-990
These bits has a back-cutter which allows milling of both the front and back of the panel in the same cut. An additional 31,7mm (1-1/4”) diameter bearing promotes safety by allowing you to take two shallow passes by using the Ø89mm (3-1/2”) bit only.
From 193,97 € - CMT8-970
These bits can be used for decorative work on solid wood panels and MDF materials.
From 44,46 €
Bits for panels
- Bits for straight cuts
- Flush trim and profiler bits
- Rebating bits
- Bits for grooves
- Bits for joinery
- Dovetail bits
- Lettering, "V" Groove and chamfer bits
- Deep profile bits
- Fillet/quarter round bits
- Profiled bits
- Multi-profile bits
- Bits for panels
- Bits for composite materials
- Bits for locks
- Box of bits
- FOZ range straight cut bits
Filter by:
Last Posts
-
-
Guide to Sharpening an Axe with a Tormek Sharpener
Sharpening an axe with precision is crucial for ensuring its effectiveness and extending its lifespan. Using a...
-
Tormek sharpeners
The professional sharpeners from the Swedish brand Tormek are renowned for their quality and...
-
Choosing a saw blade for a power tool
What saw blade to choose for your power tool based on the material to be cut and the diameter of the blade?
-
What are the 10 portable electric machines that one must have in their workshop?
Here are the 10 portable electric machines that are recommended to have in one's workshop for woodworking.
