Отправка в тот же день для всех заказов, размещенных до 14:00 по всей Европе с использованием DPD
Нет товаров
Цены указаны с учетом НДС
Товар добавлен в корзину
Товаров в корзине: 0. Сейчас в корзине 1 товар.
StubaiⓇ tools
89 товаров.- 1
- 2
STUB007-01The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.Its cutting edge is straight with a double bevel.
From 31,23 €- STUB001-01
This tool is designed to remove material thanks to the force of a mallet or the flat of the hand. Also used for cleaning mortises and remove material gradually.
From 19,42 € - STUB025-09
Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 62,32 € - STUB031-01
Ideal for sharpening gouges, chisels, etc.
From 54,08 € -
- STUB007-02
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for preparation of the work, while those less than 16 mm are for finishing.The chisel has the special feature of an oblique cutting edge for cutting into the bottom of angles...
From 31,23 € - STUB005-01
Set including :- 1 double bevel straight chisel (l : 4 mm)- 2 straight chisels (l: 8/16 mm)- 3 straight flat gouges (l : 6/10/20 mm)- 2 straight curved gouges (l : 14/10 mm)- 2 straight U gouges (l: Set including :- 1 single bevel straight chisel (l : 6 mm)- 1 straight V tool (l: 8 mm)- 1 carving knife- whittling- 1 ARKANSAS original sharpening toolThe...
From 565,86 € - STUB002-01
"Swedish style" carpenter's chiselsThis set of tools is designed to remove material thanks to the force of a mallet or the flat of the hand. Also used for cleaning mortises and remove material gradually.
From 24,64 € - STUB025-10
Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 62,32 € - STUB031-02
To prevent chips from entering the pores of the stone when sharpening and to facilitate gliding, use the special oil with the Original-Arkansas sharpening stone
From 11,78 € - STUB032-02
Make up your own kit!This roll bag is the ideal carrier for your turning tools.(supplied empty)
From 22,55 € - STUB007-03
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Its cutting edge is straight with a single bevel.Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.Its cutting edge is straight with a single bevel.
From 36,11 € - STUB025-11
Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 62,32 € - STUB002-03
Professional wood chisel with a revolutionary handle highly resistant to shocks. With its ergonomic shape, it provides comfort during use and ensures fatigue-free handling.Extra-long handle for precise control. Asymmetrical profile with non-slip rubber inserts.
From 23,93 € - STUB036-01
Wooden marking gauge with graduation (150 mm) and adjusting screws.
From 23,60 € - STUB005-03
This set of 4 tools is designed for beginners, little hands and simple carving work. These gouges are ideal for small figures, relief work and so much more. Comes in storage bag. Set includes:- 1 double bevel straight chisel (l: 8 mm)- 1 V-straight chisel (l: 4 mm)- 1 straight U gouge (l: 6 mm)- 1 carving knifeThe set is made up of tools with different...
From 130,50 € - STUB007-04
The tool has the special feature of having a straight body and an angled end. This tool is essentially used for working vertically to horizontally. This angled tool is a must-have for finishing work, hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.The angled...
From 42,73 € - STUB025-12
Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 62,32 € - STUB033-01
For wooden panels or chipboard, steel, plastic sheets and other plaster boards.
From 59,16 € - STUB005-04
This selection offers basic equipment for medium-sized carving work. Comes in storage bag.Set includes:- 1 straight flat gouge (l: 30 mm)- 1 straight curved gouge (l: 20 mm)- 1 straight U gouge (l: 25 mm)- 1 straight short gouge (l: 10 mm)The set is made up of tools with different profiles
From 181,36 € - STUB007-05
The cutting edge of this tool is wider than the body. It penetrates more easily into intertwined shapes and openwork pieces. It is essentially used for finishing and generally by the force of the wrist.
From 30,27 € - STUB025-13
Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 62,32 € -
- STUB005-05
Selected by master carvers, this set of 5 tools is the perfect start for everyone: beginners, enthusiasts and future masters. Comes in storage bag.Set including:- 1 Straight chisel (l: 20 mm)- 1 straight flat gouge (l : 16 mm)- 1 straight curved gouge (l: 10 mm)- 1 short bent gouge (l: 6 mm)- 1 V-straight chisel (l: 8 mm)The set is made up of tools with...
From 190,00 € - STUB008-01
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The flat gouge allows for several effects: shaping, roughing or finishing.
From 32,57 € - STUB025-14
Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 91,17 € - STUB005-06
This set of 3 carving tools is recommended by master woodturners. Comes in storage bag.Set includes:- 1 carving gouge (l: 22 mm)- 1 bent round end scraper (l: 15 mm)- 1 mortise chisel (l: 15 x 3 mm)The set is made up of tools with different profiles
From 333,60 € - STUB009-01
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The flat gouge allows for several effects: shaping, roughing or finishing.
From 32,57 € - STUB025-04
This tool is designed for carving end grain. If well sharpened, a very nice finish is obtained.It is composed of two cutting edges: an external bevel for hollowing and an internal bevel for straight cuts.
From 206,32 € - STUB025-06
This tool is used to make mortises (rectangular hole, female part) to accommodate the tenon (male part) in the assembly of a part.
From 72,35 € - STUB005-07
This set of 4 carving tools is recommended by master woodturners. Comes in storage bag.Set includes:- 1 carving gouge (l: 27 mm)- 1 1 U-bowl gouge (l: 16 mm)- 1 bent round end scraper (l: 15 mm)- 1 mortise chisel (l: 15 x 6 mm)The set is made up of tools with different profiles
From 499,20 € - STUB009-03
The tool has the special feature of having a straight body and an angled end. This tool is essentially used for vertical to horizontal work. It is the must-have for finishing work, the bent tool allows for hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.This...
From 37,28 € - STUB005-02
Set including :- 1 double bevel straight chisel (l : 25 mm)- 2 straight chisels (l: 10/20 mm)- 5 straight flat gouges (l : 6/10/16/25/50 mm) - 6 straight curved gouges (l : 10/10/16/20/25/50 mm)- 3 straight U gouges (l : 6/12/16/25 mm) - 1 single bevel straight chisel (l : 8 mm)- 1 straight V tool (l : 10 mm)The set is made up of tools with different...
From 66,22 € - STUB024-09
The oval cut of this tool provides better stability on the tool holder and also facilitates the cutting angle, providing a perfect surface.
From 62,33 € - STUB009-02
This tool has the special feature of having a slightly curved blade and can be used with a mallet.It allows for hollowing of the material easily and quickly.
From 40,96 € - STUB025-01
This tool is designed to hollow or finish a round clearing.
From 104,44 € - STUB021-02
Set including :- 1 straight chisel ( l : 20 mm)- 2 straight flat gouges (l : 3/20 mm)- 1 straight curved gouge (l : 12 mm)- 2 straight U gouges (l : 10/16 mm)The set is made up of tools with different profiles
From 234,77 € - STUB009-04
The tool has the special feature of having a straight body and a back bent shape.The back bent gouge makes rounded cuts in hollow or parts hard to reach with a straight gouge.
From 39,85 € - STUB022-02
Set including 6 micro-tools with ergonomic wooden handle for maximum control during delicate but also complex carvings.
From 145,03 € - STUB025-02
This tool is designed to hollow or finish a round clearing.
From 104,44 € - STUB009-05
The straight tool has a body placed in the centre line of the handle allowing for a high cutting power.The flat gouge allows for several effects : shaping, roughing or finishing.
From 36,11 € - STUB025-03
This practical tool brings together 3 parts (round, square and pear-shaped cutters) on a single handle.
From 192,75 € - STUB003-02
Set of knives used for precision cutting
From 84,31 € - STUB010-01
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The curved gouge has a slight bend to free the ends of the blade to prevent it from getting stuck...
From 32,57 € - STUB028-01
Set including :- 1 U bowl gouge (l : 13 mm)- 1 round nose chisel (l : 20 mm) - 1 flat chisel (l : 20 mm) - 1 bent round end scraper (l : 25 mm)
From 391,80 € - STUB024-04
This tool is a must-have for grain and chuck work for salad bowls or bowls. The U-bowl gouge can also be used for instance on the outside of bowls.
From 91,60 € - STUB011-01
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The curved gouge has a slight bend to free the ends of the blade to prevent it from getting stuck...
From 32,57 € - STUB029-01
This tool is a must-have for grain and chuck work for salad bowls or bowls. The U-bowl gouge can also be used for instance on the outside of bowls.
From 144,04 € - STUB011-02
The tool has the special feature of having a straight body and a back bent shape.The back bent gouge makes rounded cuts in hollow or parts hard to reach with a straight gouge.
From 39,85 € - STUB027-01
Set including :- 2 carving gouges (l : 13/22 mm)- 1 double bevel chisel (l : 25 mm)- 1 mortise chisel (l : 6 mm)
From 442,77 € - STUB024-01
This must-have wood turner's tool is used to round square stock with a soft touch result.
From 70,44 € - STUB011-03
This tool has the special feature of having a slightly curved blade and can be used with a mallet.It allows for hollowing of the material easily and quickly.
From 36,11 € - STUB024-02
This must-have wood turner's tool is used to round square stock. It is used for preliminary work to clear away as much stock as possible.
From 105,40 € - STUB002-04
Set of professional wood chisels with a revolutionary handle highly resistant to shocks. With their ergonomic shape, they provide comfort during use and ensure fatigue-free handling.Extra-long handle for precise control. Asymmetrical profile with non-slip rubber inserts.STUB356104 contains widths : 12/16/20/24 mm STUB356106 contains widths :...
From 94,57 € - STUB012-01
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The curved gouge has a slight bend to free the ends of the blade to prevent it from getting stuck...
From 32,57 € -
- STUB001-02
This set of tools is designed to remove material thanks to the force of a mallet or the flat of the hand. Also used to clean mortises and gradually remove material.Red beech handle.STUB351104 contains widths : 12/16/20/24 mmSTUB351106 contains widths : 6/10/14/18/22/26 mm
From 119,18 € - STUB012-02
This tool has the special feature of having a slightly curved blade and can be used with a mallet.It allows for hollowing of the material easily and quickly.
From 40,96 € - STUB002-02
"Swedish style" carpenter's chiselsThis set of tools is designed to remove material thanks to the force of a mallet or the flat of the hand. Also used to clean mortises and gradually remove material.Cork handle, 130 mm long.STUB357104 contains widths : 13/16/20/24 mmSTUB357114contains widths: 12/16/20/24 mmSTUB357106contains widths : 6/10/13/16/20/26 mm...
From 98,93 € -
- 1
- 2
Filter by:
Last Posts
-
-
Guide to Sharpening an Axe with a Tormek Sharpener
Sharpening an axe with precision is crucial for ensuring its effectiveness and extending its lifespan. Using a...
-
Tormek sharpeners
The professional sharpeners from the Swedish brand Tormek are renowned for their quality and...
-
Choosing a saw blade for a power tool
What saw blade to choose for your power tool based on the material to be cut and the diameter of the blade?
-
What are the 10 portable electric machines that one must have in their workshop?
Here are the 10 portable electric machines that are recommended to have in one's workshop for woodworking.
