Same-day shipping for all orders placed before 2 PM throughout Europe with DPD
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.Its cutting edge is straight with a double bevel.
This tool is designed to remove material thanks to the force of a mallet or the flat of the hand. Also used for cleaning mortises and remove material gradually.
Ideal for sharpening gouges, chisels, etc.
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for preparation of the work, while those less than 16 mm are for finishing.The chisel has the special feature of an oblique cutting edge for cutting into the bottom of angles...
Set including :- 1 double bevel straight chisel (l : 4 mm)- 2 straight chisels (l: 8/16 mm)- 3 straight flat gouges (l : 6/10/20 mm)- 2 straight curved gouges (l : 14/10 mm)- 2 straight U gouges (l: Set including :- 1 single bevel straight chisel (l : 6 mm)- 1 straight V tool (l: 8 mm)- 1 carving knife- whittling- 1 ARKANSAS original sharpening toolThe...
"Swedish style" carpenter's chiselsThis set of tools is designed to remove material thanks to the force of a mallet or the flat of the hand. Also used for cleaning mortises and remove material gradually.
To prevent chips from entering the pores of the stone when sharpening and to facilitate gliding, use the special oil with the Original-Arkansas sharpening stone
Make up your own kit!This roll bag is the ideal carrier for your turning tools.(supplied empty)
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Its cutting edge is straight with a single bevel.Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.Its cutting edge is straight with a single bevel.
Professional wood chisel with a revolutionary handle highly resistant to shocks. With its ergonomic shape, it provides comfort during use and ensures fatigue-free handling.Extra-long handle for precise control. Asymmetrical profile with non-slip rubber inserts.
Wooden marking gauge with graduation (150 mm) and adjusting screws.
The tool has the special feature of having a straight body and an angled end. This tool is essentially used for working vertically to horizontally. This angled tool is a must-have for finishing work, hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.The angled...
For wooden panels or chipboard, steel, plastic sheets and other plaster boards.
The cutting edge of this tool is wider than the body. It penetrates more easily into intertwined shapes and openwork pieces. It is essentially used for finishing and generally by the force of the wrist.
Panel holder, bimaterial, can be used on the right or left.
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The flat gouge allows for several effects: shaping, roughing or finishing.
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The flat gouge allows for several effects: shaping, roughing or finishing.
The tool has the special feature of having a straight body and an angled end. This tool is essentially used for vertical to horizontal work. It is the must-have for finishing work, the bent tool allows for hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.This...
Set including :- 1 double bevel straight chisel (l : 25 mm)- 2 straight chisels (l: 10/20 mm)- 5 straight flat gouges (l : 6/10/16/25/50 mm) - 6 straight curved gouges (l : 10/10/16/20/25/50 mm)- 3 straight U gouges (l : 6/12/16/25 mm) - 1 single bevel straight chisel (l : 8 mm)- 1 straight V tool (l : 10 mm)The set is made up of tools with different...
This tool has the special feature of having a slightly curved blade and can be used with a mallet.It allows for hollowing of the material easily and quickly.
Set including :- 1 straight chisel ( l : 20 mm)- 2 straight flat gouges (l : 3/20 mm)- 1 straight curved gouge (l : 12 mm)- 2 straight U gouges (l : 10/16 mm)The set is made up of tools with different profiles
The tool has the special feature of having a straight body and a back bent shape.The back bent gouge makes rounded cuts in hollow or parts hard to reach with a straight gouge.
Set including 6 micro-tools with ergonomic wooden handle for maximum control during delicate but also complex carvings.
The straight tool has a body placed in the centre line of the handle allowing for a high cutting power.The flat gouge allows for several effects : shaping, roughing or finishing.
Set of knives used for precision cutting
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The curved gouge has a slight bend to free the ends of the blade to prevent it from getting stuck...
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The curved gouge has a slight bend to free the ends of the blade to prevent it from getting stuck...
The tool has the special feature of having a straight body and a back bent shape.The back bent gouge makes rounded cuts in hollow or parts hard to reach with a straight gouge.
This tool has the special feature of having a slightly curved blade and can be used with a mallet.It allows for hollowing of the material easily and quickly.
Set of professional wood chisels with a revolutionary handle highly resistant to shocks. With their ergonomic shape, they provide comfort during use and ensure fatigue-free handling.Extra-long handle for precise control. Asymmetrical profile with non-slip rubber inserts.STUB356104 contains widths : 12/16/20/24 mm STUB356106 contains widths :...
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The curved gouge has a slight bend to free the ends of the blade to prevent it from getting stuck...
This set of tools is designed to remove material thanks to the force of a mallet or the flat of the hand. Also used to clean mortises and gradually remove material.Red beech handle.STUB351104 contains widths : 12/16/20/24 mmSTUB351106 contains widths : 6/10/14/18/22/26 mm
This tool has the special feature of having a slightly curved blade and can be used with a mallet.It allows for hollowing of the material easily and quickly.
"Swedish style" carpenter's chiselsThis set of tools is designed to remove material thanks to the force of a mallet or the flat of the hand. Also used to clean mortises and gradually remove material.Cork handle, 130 mm long.STUB357104 contains widths : 13/16/20/24 mmSTUB357114contains widths: 12/16/20/24 mmSTUB357106contains widths : 6/10/13/16/20/26 mm...
The tools has the special feature of having a straight body and an angled end. This tool is essentially used for vertical to horizontal work. It is the must-have for finishing work, the bent tool allows for hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.This...
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The flat gouge allows for several effects: shaping, roughing or finishing.
The tool has the special feature of having a straight body and a back bent shape.The back bent gouge makes rounded cuts in hollow or hard to reach parts with a straight gouge.
This tool is used to turn end grain or with the grain as well as all kinds of work.
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The flat gouge allows for several effects: shaping, roughing or finishing.
This tool has the special feature of having a slightly curved blade and can be used with a mallet.It allows for hollowing of the material easily and quickly.
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The flat gouge allows for several effects: shaping, roughing or finishing.
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.
This tool has the special feature of having a slightly curved blade and can be used with a mallet.It allows for hollowing of the material easily and quickly.
The tool has the special feature of having a straight body and an angled end. This tool is essentially used for vertical to horizontal work. It is the must-have for finishing work, the bent tool allows for hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.This...
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving.The blade ends in a V-shaped cutting edge, its tip has a slightly rounded or sharp angle. This tool is designed to cut straight lines as well as curves, it is often used by sculptors and furniture restorers.
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving.The blade ends in a V-shaped cutting edge, its tip has a slightly rounded or sharp angle. This tool is designed to carve straight lines as well as curves, it is often used by sculptors and furniture restorers.
This tool has the special feature of having a slightly curved blade and can be used with a mallet.It allows for hollowing of the material easily and quickly.
The tool has the special feature of having a straight body and an angled end. This tool is essentially used for vertical to horizontal work. It is the must-have for finishing work, the bent tool allows for hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.The...
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving.The blade ends in a V-shaped cutting edge, its tip has a slightly rounded or sharp angle. This tool is designed to carve straight lines as well as curves, it is often used by sculptors and furniture restorers.
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving.The blade ends in a V-shaped cutting edge, its tip has a slightly rounded or sharp angle. This tool is designed to carve straight lines as well as curves, it is often used by sculptors and furniture restorers.
The mallet has an ergonomic shape for sculptors to turn it in their hand and always have a good striking angle.The force with which the tool is struck increases the power of the movement limiting the effort.
Micro-tool with ergonomic wooden handle for maximum control during delicate but also complex carvings.
This tool is part of the rasp family, used to shape parts with complex shapes, to access corners and hard to reach surfaces.Used for meticulous modelling work.
Loading...
Last Posts
The professional sharpeners from the Swedish brand Tormek are renowned for their quality and...
What saw blade to choose for your power tool based on the material to be cut and the diameter of the blade?
Here are the 10 portable electric machines that are recommended to have in one's workshop for woodworking.
There are many circular saw blades available on the market.
Here are 15 questions to ask when purchasing woodworking machining tools.