To be used on leather honing wheels. Average grain size 3 microns. Hones and polishes the edge.
Sharpen your straight chisels and planing knives to a perfect right angle.It is designed to provide the optimum conditions for successful sharpening and a high precision end result. It also provides a slightly convex shape.
Enables you to easily rotate the machine 180° and lock it with complete stability. It makes it easy to alternate between sharpening/ honing or sharpening towards or away from the edge.Suitable for all models: T-8, T-7, T-4, T-3, 2000 and 1200.
The fine side grades the stone for a 1000 grit finish. The coarse side of the grader reverses the stone to normal fast grinding.
The kit allows you to remove a large amount of steel to create a desired profile on a new tool, it also allows you to use the Tormek® woodturning jigs on your grinder.
For turning skew chisels, parting and beading tools and roughing gouges.Straight carving gouges up to 50 mm (2”) wide.
For straight shanked carving gouges and V-tools down to 45 mm (1¾”) length.Short wood chisels and tools for power carvers. Max tool width 38 mm (1½”).
For blades of any length.Blades longer than 270 mm (10½”) are relocated in the blade holder. Min width of blade 13 mm (½”).
Replicates the geometry on turning gouges and skews when using the SVD-186 and SVS-50 jigs. Also designed for pre-set bevels.
For turning scrapers, hollowing tools and thin parting tools.Also for cabinet scrapers, screwdrivers and spoke shave blades.
Trues the grindstone exactly round and flat.Guided by the universal support. Dual knobs for smooth feed across the stone.
Sharpens drill bits to a 4-facet point. Can be set at any angle between 90°and 150°. The optimal clearance angle can be set for each drilling operation. Drill size 3 to 22 mm (7/64” to 7/8”).
For the inside honing and polishing of turning/carving gouges and V-tools.Set of two discs, one with a 3 mm (⅛”) radius and one with a 60° tip.
Mesure et règle l'angle du biseau.Ajustable sur tout diamètre de meule de 210 à 150 mm de diamètre. Mesure de 10° à 75°.
With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left hand thread causes the rotation of the wheel to tighten the nut to the right torque.Ø; stone: 250 mm
With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left hand thread causes the rotation of the wheel to tighten the nut to the right torque. Ø; stone: 250 mm
The trough has an enlarged standard lip which ensures that your workbench stays free from water. It also includes an embedded magnet to collect steel particles and a removable water chute for long tools.
The TNT-00 storage tray stores all the jigs included with the Woodturner’s Kit.
The HTK-00 storage tray stores all the jigs included with the Hand Tool Kit.
The Tormek Case keeps your jigs and accessories organised. It is easy to carry thanks to the premium leather handle.
Protects your machine from shavings and wood dust. 100 % cotton. Fits all Tormek® models.
For all sizes of scissors and shears. Also suitable for electric plane blades.
For carving and carpenter's axes.Max height of axe 170 mm (6½”). Copes with both straight and curved edges.
Drive wheels for the Tormek® water cooled sharpening machine.
The Universal support is the basis for all Tormek® jigs. It has a square cut Acme style thread which prevents damage by the locking screws and a Micro Adjust with scale for precise setting of the edge angle and cutting depth.
The rubber mat dampens vibrations but also providesa water proof yet non slip surface during sharpening. The raised rim will retain any water spillage. Dimension: 533 × 343 mm. (supplied with Tormek® sharpening station)
The easy to use composite honing disc has a built-in polishing agent that removes the hard edge.Suitable for use in clean environments. No need to add hone compound.Compatible with Tormek® T-8, Tormek® T-7 and Tormek® 2000.Tip when honing! Moisten the composite honing disc with a little water for smoother honing. Use a sponge or cloth.
The MB-100 base has an adjustment line that allows you to fix the sharpening position based on the optimal setting for each tool and jig. The MB-100 For convenience, it can be mounted vertically or horizontally.
For the Tormek® LA-120 profiled leather honing wheel. Two disks included: one with a radius of 2 mm and one with a 45° tip.
The wheels is used together with the PA-70 honing compound to gently to remove the burr which develops during grinding and polishes the bevel.
The set contains 9 extra labels so you can record your favourite profiles on all your bowl gouges, spindle gouges and skews.
For sharpening very small knives such as penknives and carving knives.
Trues the grindstone exactly round and flat. Guided by the universal support. Dual knobs for smooth feed across the stone.
For the Tormek® LA-120 profiled leather honing wheel. Two disks included: one with a radius of 3 mm and one with a 60° tip.
The edge marker with a chisel tip is designed to easily colour the bevel when you want to find and replicate the tools existing edge angle.
Concentrate to make water non-corrosive. Always use with diamond wheels and can also be used with standard grindstones.
For all makes and shapes of moulding knives with 24, 30 or 38 mm distance between guide hole centres. Max width of blade 100 mm (4”).
The first version of the gouge Jig, SVD-180, did not have the shaft for sharpening cutters included. You can add this upgrade kit and you will be able to sharpen turning cutters as well.
Exchange diamond bit for Tormek TT-50 truing tool.
Sharpen your fingernail shaped woodturning gouges to a razor like edge. You can also sharpen woodcarving tools with complex shapes such as curved or bent carving gouges and V-tools.
Extended universal jig for sharpening long tools such as long knives, choppers and machetes. Micrometric adjustment with scale for precise setting of the edge angle.
Upgrade kit for older Tormek® machines. Thanks to the horizontal base, you can move the universal support from vertical mount (for grinding towards the edge) to horizontal mount for grinding away from edge.).
The professional sharpeners from the Swedish brand Tormek are renowned for their quality and...
What saw blade to choose for your power tool based on the material to be cut and the diameter of the blade?
Here are the 10 portable electric machines that are recommended to have in one's workshop for woodworking.
There are many circular saw blades available on the market.
Here are 15 questions to ask when purchasing woodworking machining tools.