Same-day shipping for all orders placed before 2 PM throughout Europe with DPD.
No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Bits with carbide knives
Discover our 27 references in the category : Bits with carbide knives
Planing cutter with Xtreme reversible knives
CMT663.5New milling cutter for CNC pantographs, ideal for planing and for quickly removing material from large surfaces, guaranteeing a good finish.For use on soft and hard wood, chipboard and MDF.Economically attractive solution thanks to the reversible knives.
From 228,06 €-
-
-
-
Cutter heads for making expandables grooves on CNC
FRAI105For making expandable grooves on CN.
From 725,04 € -
Adjustable grooving cutter head with knives Z2 + 2, V2 + 2
ME110WS-01- Grooving cutting head for solid wood and panels of all kinds (coated or non-coated)- Steel body with reversible carbide knives on 4 cutting edges- Two-piece, adjusted by spacers- Recommended for routers and CNC machines - MEC / mechanical feed
From 503,45 € -
Flush trim and surfacing bits with Z3 knives
PS122WS-01- Bit with reversible 4-sided carbide knives for fast rebating, flush trimming and surfacing large surface areas- Suitable for soft and hardwood and all kinds of panels- Recommended for routers and CNC machines- MEC / mechanical feed
From 374,72 € -
Spoilboard surfacing router cutters with insert knives
CMT663New router bit for CNC router ideal for fast removal of material over a large surface area leaving an improved finish at the bottom of the cut. Used on soft and hardwood, particle board and MDF. The cutter uses 4-sided inserts. Cost effective solution compared to brazed router bits and solid carbide spiral bits.
From 231,55 € -
-
Joining cutter head for woodwork
EU8020-01- For glue joints of edging- Cutters with PRECIS-CUT carbide knives- Cutter head mounted on CNC arbor
From 1 272,71 € -
Z2 glue joint tongue and groove cutter head
PA020WS-01To produce glue joints in soft and hardwood. Non-reversible carbide knives with positioning stop for quick and precise positioning + an eccentric ring for lateral adjustment of the knives for the glue joint, depending on the species of wood processed.
From 753,60 € -
Sizing roughing cutter head Z2 + 2
PC505WS-01- Roughing cutter head with HW knives to size soft and hardwood as well as coated or non-coated panels- Reversible knives with 4 cutting edges, spread over 4 spirals for optimum chip removal and flow- Suitable for routers and CNC machines- MEC / mechanical feed
From 305,89 € -
Sizing and rebate cutter head Z2 + 2
PC808WS-01- Cutter head to straighten, size and rebate solid wood and various panels- Particularly suitable for curved woodwork or chair legs- 2+2 alternating mitre cuts with 4-sided reversible carbide knives, helically mounted on 4 divisions + 2 spurs in the lower part- Optimised helix angle and clean cut for high feed rates- To be mounted on cutter arbor Ø30 x...
From 527,40 € -
Folding and chamfer bits with Z1 knives
PA030WS-01- To produce chamfers, decorative grooves and mitre fold grooves in all kinds of wood and panels- Cutter head with reversible carbide knives with side stop for quick and precise positioning- MEC / mechanical feed
From 340,87 € -
V-groove - Folding - Signmaking CNC Router Cutter
CMT663.101.11This innovative CNC router bit offers you an endless range of possibilities for V-Groove, miter folds, signmaking, lettering and chamfer edges. The tool mounts a high grade HWM reversible knife ideal for general purpose, chipboard and plywood, but a higher quality is available for laminated and MDF material.
From 204,03 € -
45° chamfer cutter head with Z2 knives
ME246WS-01- Cutter head to produce 45° chamfers in solid wood, plywood and all kinds of panels- Reversible carbide knivesn no front edge cutting- MEC / mechanical feed
From 340,87 € -
Adjustable angle cutter head with Z2 knives
ME400WS-01- Continuous adjustable angle cutter head range to 45° towards top and to 90° towards bottom- To produce chamfers and raised panels in solid wood and laminates- Steel body with reversible carbide knives, 4 cutting edges- MEC / mechanical feed
From 991,20 € -
Adjustable Chamfering CNC Cutter
CMT663.201.11For jointing, rebating and chamfering of solid wood and wooden boards. Suitable for CNC router machines and stationary router machine with manual or mechanical feed.
From 798,81 € -
-
Facing, roundover or chamfer bits with Z1 + 1 knives
ME500WS-01- For facing, rounding or chamfering, top and bottom, in all sorts of wood and panels- Using the same body (size 1 or 2) you can mount interchangeable carbide knives for chamfering or rounding with different radii- Peripheral cutting only, no front edge cutting- MEC / mechanical feed - Insert knives not supplied
From 491,11 € -
Roundover or chamfer bits with Z2 knives
ME215WS-01- For roundover or chamfer profiles, top and bottom, in all kinds of wood or panels- Cutter head with knives that can be changed for roundover and chamfer profiles using the same cutter head- MEC / mechanical feed
From 389,67 € -
Handrail profile cutter head Z2 + 2 standard profiles
PO028WS-01- Execution: Body of 2 + 2 decomposed cuts with axis angle. Right hand rotation for mechanical feed.- Application: for profiling stair rails, handrail on CNC machine with horizontal aggregate- -Nmax. 8,000 rpm-1- Profiled cut with standard profiled knives
From 857,47 € -
Router cutter for decorating
CMT616This unique system includes a tool body with 22 profile knives designed for multiple applications on your CNC routers. Ideal for MDF, laminates, veneers, plastic, wood and solid surface materials.
From 132,56 € -
-
MDF door bit bodies
CMT615-COUTEAUExtremely precise bits to make MDF panel doors for kitchens and bathrooms. Each bit is made from bar stock steel and the highest quality tungsten materials.
From 87,91 € -
Complete set for decorating on MDF
CMT616-COFFRETThis unique system includes a tool body with 22 profile knives designed for multiple applications on your CNC routers. Ideal for MDF, laminates, veneers, plastic, wood and solid surface materials.
From 794,31 € -
Complete set for MDF doors
CMT615.004.01Open some new doors with CMT. Our 4-piece set includes the most popular profile to make MDF panel doors for kitchens and bathrooms. Each bit is made from bar stock steel and is equipped with 5 different profile knives allowing enormous possibilities for easy and economical construction. The highest materials, the lowest tolerance in balancing and the...
From 1 009,51 €
Filter by:
Last Posts
-
The Importance of a Well-Sharpened Knife in the Kitchen
Discover how to sharpen your kitchen knives optimally with a sharpening machine.
-
The Japanese Takagi Shark Saw: A blend of tradition and technology for perfect cuts
The Japanese Takagi saws, particularly the Shark Saw series, are renowned for their efficiency and precision.
-
Knife sharpening angle adjuster KS-123 Tormek
Set the perfect sharpening...
-
TAKAGI - SHARK SAW
Presentation of the Japanese...
-
