Отправка в тот же день для всех заказов, размещенных до 14:00 по всей Европе с использованием DPD
Нет товаров
Цены указаны с учетом НДС
Товар добавлен в корзину
Товаров в корзине: 0. Сейчас в корзине 1 товар.
Популярные товары
-
-
-
SASUGA
SASUGA560This cutter is the perfect tool to cut all kinds of insulation material (flax, glass wool, polystyrene boards, polyurethane foam). The knife makes a smooth cut without irritating dust particles. The knife comes standard with canvas holster.
From 124,49 € -
-
-
-
-
-
Chalk line
MESU022-01With an integrated tip for working alone. 20 m highly resistant braided wire. Thanks to the transparent box, you can see the powder. Manual winding.
From 41,54 € -
Carpenter's square 300 x 150 mm
MESU018-02Super thin stainless steel square. Perfect for drawing on working drawings and cheek walls. Internal and external dimensions in cm and mm.
From 7,36 € -
Aluminium false square
MESU017-02250mm length. Light for inside and outside corners. Extra flat double-sided heel. Locking knob.
From 25,67 € -
Aluminium sliding T bevel
MESU017-0130mm-wide arm equivalent to a carpenter's gauge. Graduation: cm and mm on one side, degrees on the other side. Non overlapping heel for measurement.
From 51,17 € -
Jig saw blades JT127D
JT127DSpecial for aluminium, thin to thick from 3mm to 15mm (1/8”~5/8”), pipes, profiles with diameter
From 8,44 € -
-
Arno wood chisels
EBAUCHOIR-02Chisels specially designed for carpentry work. Each chisel is perfectly polished and finely sharpened. Equipped with a wrapped handle very comfortable: improved handling and insulate from the cold. Sizes: 20-25-28-30-35-40mm.
From 47,04 € -
Pattern/flush trim router bits with insert knives
CMT657BFlush trim bit combined with pattern bits fixed by special Torx screws. The blades are two-sided sharpened and can give extra new edges. 657 guided flush trim bits are equipped with top and bottom ball bearing guides. For flush and finish operations.
From 83,57 € -
Solid carbide upcut spiral bits
CMT198Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors.
From 35,23 € -
Solid carbide downcut spiral bits
CMT192Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors.
From 35,23 €